Liverpool Skyline

Department of Maritime and Mechanical Engineering

Prof Ian Jenkinson

Prof Ian Jenkinson

Telephone: 0151 231 2011

Publications

Journal Articles

Paraskevadakis D, Bury A, Wang J, Ren J, Bonsall S, Jenkinson I. 2016. The impact of transport infrastructure projects on sustainable development within a major logistics gateway in North West England Logistics & Sustainable Transport, 7 >DOI

Kavakeb S, Trung TN, Yang Z, Jenkinson I. 2016. Evolutionary Fleet Sizing in Static and Uncertain Environments with Shuttle Transportation Tasks-The Case Studies of Container Terminals IEEE COMPUTATIONAL INTELLIGENCE MAGAZINE, 11 :55-69 >DOI >Link

Kavakeb S, Trung TN, McGinley K, Yang Z, Jenkinson I, Murray R. 2015. Green vehicle technology to enhance the performance of a European port: A simulation model with a cost-benefit approach TRANSPORTATION RESEARCH PART C-EMERGING TECHNOLOGIES, 60 :169-188 >DOI >Link

McNamara D, Cunningham A, Jenkinson I, Wang J. 2014. Application of the Monte Carlo method to marine system maintenance studies considering failure modes and spare part stock control JOURNAL OF MARINE ENGINEERING AND TECHNOLOGY, 13 :37-58 >Link

McNamara D, Cunningham A, Jenkinson I, Wang J. 2014. A model assessing cost of operating marine systems using data obtained from Monte Carlo analysis PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART M-JOURNAL OF ENGINEERING FOR THE MARITIME ENVIRONMENT, 228 :398-412 >DOI >Link

T R, D A, C M, I J. 2014. Monitoring of Biodiesel Transesterification Process Using Impedance Measurement International Journal of Materials, Mechanics and Manufacturing, 2 :265-271 >DOI

Rachmanto T, Allanson D, Matthews C, Jenkinson I. 2013. Measuring Mass Transfer on Biodiesel Process by Means of Impedance Measurement Applied Mechanics and Materials, 391 :467-472 >DOI

Riahi R, Robertson I, Bonsall S, Jenkinson I, Wang J. 2013. A proposed methodology for assessing the reduction of a seafarer's performance with insufficient recuperative rest JOURNAL OF MARINE ENGINEERING AND TECHNOLOGY, 12 :11-28 >Link

Matellini DB, Wall AD, Jenkinson ID, Wang J, Pritchard RW. 2013. A study of human reaction during the initial stages of a dwelling fire using a Bayesian network model PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART O-JOURNAL OF RISK AND RELIABILITY, 227 :207-221 >DOI >Link

Matellini DB, Wall AD, Jenkinson ID, Wang J, Pritchard R. 2013. Modelling dwelling fire development and occupancy escape using Bayesian network RELIABILITY ENGINEERING & SYSTEM SAFETY, 114 :75-91 >DOI >Link

Matellini DB, Wall AD, Jenkinson ID, Wang J, Pritchard R. 2012. A Bayesian network model for fire development and occupant response within dwellings Proceedings of IEEE 2012 Prognostics and System Health Management Conference, PHM-2012, >DOI

Matellini DB, Wall AD, Jenkinson ID, Wang J, Pritchard R. 2012. Bayesian network modelling for fire safety assessment: Part I-a study of human reaction during the initial stages of a dwelling fire Berenguer C, Grall A, Soares CG. ADVANCES IN SAFETY, RELIABILITY AND RISK MANAGEMENT, :626-633 >Link

Riahi R, Bonsall S, Jenkinson I, Wang J. 2012. A seafarer's reliability assessment incorporating subjective judgements PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART M-JOURNAL OF ENGINEERING FOR THE MARITIME ENVIRONMENT, 226 :313-334 >DOI >Link

Yang ZL, Zhang D, Caglayan O, Jenkinson ID, Bonsall S, Wang J, Huang M, Yan XP. 2012. Selection of techniques for reducing shipping NOx and SOx emissions TRANSPORTATION RESEARCH PART D-TRANSPORT AND ENVIRONMENT, 17 :478-486 >DOI >Link

Jones B, Jenkinson I, Wang J. 2010. The use of fuzzy set modelling for maintenance planning in a manufacturing industry PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING, 224 :35-48 >DOI >Link

Jones B, Jenkinson I, Wang J. 2010. The use of fuzzy set modelling for maintenance planning in a manufacturing industry Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 224 :35-48 >DOI

Jones B, Jenkinson I, Yang Z, Wang J. 2010. The use of Bayesian network modelling for maintenance planning in a manufacturing industry RELIABILITY ENGINEERING & SYSTEM SAFETY, 95 :267-277 >DOI >Link

Jenkinson ID, Jones B, Wang J. 2010. The use of fuzzy set modelling for maintenance planning in a manufacturing industry Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 224 :35-48 >DOI

Ehtezazi T, Saleem I, Shrubb I, Allanson DR, Jenkinson ID, O'Callaghan C. 2010. The interaction between the oropharyngeal geometry and aerosols via pressurised metered dose inhalers. Pharm Res, 27 :175-186 >DOI >Link

Ren J, Jenkinson I, Wang J, Xu DL, Yang JB. 2009. An Offshore Risk Analysis Method Using Fuzzy Bayesian Network JOURNAL OF OFFSHORE MECHANICS AND ARCTIC ENGINEERING-TRANSACTIONS OF THE ASME, 131 >DOI >Link

Jenkinson ID, Jones B, Wang J. 2009. Methodology of using delay-time analysis for a manufacturing industry Reliability Engineering & System Safety, 94 :111-124 >DOI

Yang ZL, Bonsall S, Jenkinson ID, Wang J. 2008. Risk and security assessment of container supply chains 9th International Conference on Probabilistic Safety Assessment and Management 2008, PSAM 2008, 3 :2528-2536

Ren J, Jenkinson I, Wang J, Xu DL, Yang JB. 2008. A methodology to model causal relationships on offshore safety assessment focusing on human and organizational factors JOURNAL OF SAFETY RESEARCH, 39 :87-100 >DOI >Link

Ehtezazi T, Allanson DR, Jenkinson ID, Shrubb I, O'Callaghan C. 2008. Investigating improving powder deagglomeration via dry powder inhalers at a low inspiratory flow rate by employing add-on spacers. J Pharm Sci, 97 :5212-5221 >DOI >Link

Dolinsky JU, Jenkinson ID, Colquhoun GJ. 2007. Application of genetic programming to the calibration of industrial robots COMPUTERS IN INDUSTRY, 58 :255-264 >DOI >Link

Ehtezazi T, Allanson DR, Jenkinson ID, O'Callaghan C. 2006. Effect of oropharyngeal length in drug lung delivery via suspension pressurized metered dose inhalers. Pharm Res, 23 :1364-1372 >DOI >Link

Conference Publication (journal proceedings)

Qu Z, Asquco M, Jenkinson I, Wang J, Yang Z. 2015. Measurement and Management of KPIs under Uncertainty: A Case of Shipping Management 2015 International Conference on Quality, Reliability, Risk, Maintenance, and Safety Engineering :393-402

Kavakeb SK, Nguyen , Benmerikhi MB, Yang Z, Jenkinson I. 2014. An improved memetic algorithm to enhance the sustainability and reliability of transport in container terminals Seventh IEEE Symposium on Computational Intelligence for Security and Defense Applications (CISDA), 2014 :1-1 >DOI

Su XX, Gu YD, Finlay JP, Jenkinson ID, Ren XJ. 2011. Inverse Analysis of Material Parameters of Multiple Foam Layers Based on Artificial Neural Network Jiang ZY, Li SQ, Zeng JM, Liao XP, Yang DG. MANUFACTURING PROCESS TECHNOLOGY, PTS 1-5, 2nd International Conference on Manufacturing Science and Engineering 189-193 :3313-3316 >DOI >Link

Elkut F, Krywonos J, Fenwick J, Jenkinson I, Ren XJ. 2010. An Experimental and Numerical Program to Study the Properties of Thin Biological Membranes and Water Filling Process IFMBE Proceedings, World Congress on Medical Physics and Biomedical Engineering Volume 25/4 :2178-2180 >DOI

Su XX, Gu YD, Finlay JP, Jenkinson ID, Ren XJ. 2010. Rapid Identification of Nonlinear Material Parameters of Foams Based on Neural Network Lim CT, Goh JCH. 6TH WORLD CONGRESS OF BIOMECHANICS (WCB 2010), PTS 1-3, 6th World Congress of Biomechanics (WCB 2010) 31 :243-246 >Link

Dolinsky JU, Jenkinson ID, Colquhoun GJ. 2000. Structural identification and calibration of kinematic robot models by genetic search Hayhurst DR. PROCEEDINGS OF THE 33RD INTERNATIONAL MATADOR CONFERENCE, 33rd International MATADOR Conference :197-202 >Link

JENKINSON ID, MONTGOMERY PA, MILLS B. 1994. ROBOT SIMULATION IN WORKCELL DESIGN AND PROGRAMMING Medhat S. PROCEEDINGS OF THE 2ND INTERNATIONAL CONFERENCE ON CONCURRENT ENGINEERING AND ELECTRONIC DESIGN AUTOMATION, 2nd International Conference on Concurrent Engineering and Electronic Design Automation :238-241 >Link

JENKINSON ID, MONTGOMERY PA, MILLS B. 1994. PC BASED ROBOT SIMULATION APPLIED TO AUTOMOTIVE ASSEMBLY CELLS Case K, Newman ST. ADVANCES IN MANUFACTURING TECHNOLOGY VIII, 10th National Conference on Manufacturing Research - Advances in Manufacturing Technology VIII :386-390 >Link