2022/23 entry

BEng (Hons) Mechatronics and Autonomous Systems

Start date:

September 2022

Study mode:

Full time

Course Duration:

3 years, 4 years with placement

UCAS code:

F001

Points required:

112

Campus:

City

Tuition fees (per year)

Home (full-time):
£9,250
International (full-time):
£16,600
All figures are subject to yearly increases.
Tuition fees are subject to parliamentary approval.

General enquiries:

0151 231 5090

Faculty of Engineering and Technology:

0151 231 2777

fetadmissions@ljmu.ac.uk

International enquiries

international@ljmu.ac.uk

Send a message >

Why study Mechatronics and Autonomous Systems at Liverpool John Moores University?

  • Interdisciplinary course fusing mechanical, electronic and control engineering
  • Well-equipped electronics and computing laboratories
  • State-of-the-art software and excellent technical support
  • To be accredited by the Institution of Engineering and Technology (IET)
  • Options for sandwich with year-long industrial placement or study abroad

About your course

Mechatronic and autonomous systems build and run the world we live in. From the robots that built your car to fast food restaurant interactive kiosks, intelligent machines are the future. The BEng(Hons) in Mechatronic and Autonomous Systems will make sure you take an important part in that future.

​This programme has been developed to answer a need in industry for engineers with the fusion of electronic and mechanical skills required to develop modern automation systems. LJMU has built a good relationship with North West engineering companies and their feedback has been a big factor in the development of this programme. We live in an information age and our graduates leave equipped with the software and hardware skills required to succeed in the exciting times ahead.

 

Research undertaken by the Department of Electronics and Electrical Engineering is based within the Electrical and Electronic Engineering Research Centre. The Centre has two key research groups – the Microelectronics Research Group and the Electric Machines and Drives Research Group. These two research groups have expertise within the following key research areas:

  • New materials and devices for future microelectronic industry
  • New characterisation techniques for VLSI devices
  • Development of advanced techniques for variables-speed electric drives
  • Qualification, modelling and aging prediction
  • Development of novel control techniques for power electronic converters
  • Modelling, simulation and experimental characterisation of power electronic converters and variable speed drives 

Research staff are encouraged to make use of their expertise during undergraduate and postgraduate teaching.

Fees and funding

There are many ways to fund study for home and international students

Fees

The fees quoted above cover registration, tuition, supervision, assessment and examinations as well as:

  • Library membership with access to printed, multimedia and digital resources
  • Access to programme-appropriate software
  • Library and student IT support
  • Free on-campus wifi via eduroam

Additional costs

Although not all of the following are compulsory/relevant, you should keep in mind the costs of:

  • accommodation and living expenditure
  • books (should you wish to have your own copies)
  • printing, photocopying and stationery
  • PC/laptop (should you prefer to purchase your own for independent study and online learning activities)
  • mobile phone/tablet (to access online services)
  • field trips (travel and activity costs)
  • placements (travel expenses and living costs)

Money

  • student visas (international students only)
  • study abroad opportunities (travel costs, accommodation, visas and immunisations)
  • academic conferences (travel costs)
  • professional-body membership
  • graduation (gown hire etc)

Funding

There are many ways to fund study for home and international students. From loans to International Scholarships and subject-specific funding, you’ll find all of the information you need on our specialist funding pages.

Employability

Where will my BEng(Hons) in Mechatronics and Autonomous systems take me?

Where will my BEng(Hons) in Mechatronics and Autonomous Systems with Foundation Year take me?

Quite literally anywhere in the world. All of industry now uses industrial automation systems, whether the company is involved in manufacturing or process control. Modern automobile production would be impossible without the robots, CNC machines and automated test equipment that make sure the sub-assemblies the human workers bolt together, fit properly and work as intended.

Robotics and autonomous systems are a red-hot topic now, with the move toward self-driving automobiles, which will almost certainly be upon us in the next few years. This will be the biggest change in transport since the invention of the "horseless carriage".

 

​Even service industries are now using automated systems. Fast food restaurants use automatic serving kiosks, not only to save on wages, but because they have found to their surprise that customers actually like them! Machines allow the customer to be in control and choose whatever weird meal combination they want.

Recent LJMU engineering graduates are now working at Sellafield, Jaguar Landrover, Aston Martin and IBM

Careers, Employability and Enterprise Service

We are committed to ensuring all of our students experience a transformation in their employability skills and mindset and their career trajectory. A wide range of opportunities and support is available to you, within and beyond your course.

Every undergraduate curriculum includes Future Focus, an e-learning resource and workshop designed to help you to develop personal insight into your talents, passion and purpose. It will enable you to become more proactive, adaptable and resilient in your awareness and approach to career possibilities. You’ll be encouraged to engage with personal and professional development opportunities.

A suite of learning experiences, services and opportunities is available to final year students to help ensure you leave with a great onward plan and the means to make it a reality.

Our Centre for Entrepreneurship can help you to grow your enterprise skills and to research, plan and start your own business. You also have access to Careers Zone 24/7, LJMU’s state-of-the-art suite of online tools and resources; opportunities for flexible, paid and part-time work through Unitemps, themed webinars; an annual programme of employer events; funded extracurricular internships and one-to-one advice to accelerate your job search, CV and interview technique.

Applicant key information

Course review and revalidation.

This course is currently undergoing its scheduled programme review, which may impact the advertised modules. Programme review is a standard part of the University’s approach to quality assurance and enhancement, enabling us to ensure that our courses remain up to date and maintain their high standard and relevancy.

Once the review is completed, this course website page will be updated to reflect any approved changes to the advertised course. These approved changes will also be communicated to those who apply for the course to ensure they wish to proceed with their application.

A life-changing experience 

There's so much more to university than just studying for a degree.

News and views

Browse through the latest stories and updates from the University and beyond

What you will study on this degree

Please see guidance on core and option modules for further information on what you will study

Further guidance on modules

Modules are designated core or option in accordance with professional body requirements, as applicable, and LJMU’s Academic Framework Regulations.

Whilst you are required to study core modules, optional modules are also included to provide you with an element of choice within the programme. The availability of optional modules may vary from year to year and will be subject to meeting minimum student numbers.

Where changes to modules are necessary these will be communicated as appropriate.

Please see the programme specification document for further details on this course:

Programme specification document (PDF)

Level 4

Core modules

Applied Mechanics 1
20 credits

This module will introduce you to the essential principles of applied mechanics. The module will provide you with an introduction to essential applied mechanics (static force systems, strength of materials, kinematics, dynamics, impulse and momentum).

Microprocessors and Software
20 credits

This module provides an overview of the operation of modern microprocessors/microcontrollers and the mechanisms used to represent and process information. The module introduces you to the fundamentals of Computer architecture and the development of high level software. You will design and implement applications written in both low level and high level languages.

Electrical Circuit Principles
20 credits

This module enhances your knowledge and understanding of the essential mathematics underpinning electrical and electronic engineering and develops your intellectual abilities in selecting and applying appropriate circuit analysis techniques for analysing various electrical and electronic circuits. You will also be introduced to passive electronic components and understand their operating characteristics.

Digital and Analogue Electronics
20 credits

This module aims to introduce you to transistors, the small-signal equivalent circuits, the use of operational amplifiers and the operation of combinational and sequential digital logic circuits. You will gain fundamental knowledge and practical skills in digital and analogue electronics circuit analysis and design.

Electrical Engineering Practice 1
20 credits

This module aims to enhance your knowledge and understanding of electrical and electronic circuits by completing a set of practical experiments. You will gain experience in the practical design of electronic circuits including prototyping and PCB design and you will develop professional practical skills to undertake experimental laboratory work. You will test design ideas in laboratories or through simulation, analyse and critically evaluate technical issues, and present and document ideas and results. 

Engineering Mathematics 1a
10 credits

This module provides a foundation in pre-calculus for you. It enables you to apply this to the solution of engineering problems. Coursework assessment will be through online questions delivered using online assessment software.

Engineering Mathematics 1b
10 credits

This module provides a foundation in engineering mathematics for you. It enables you to apply this to the solution of engineering problems. Coursework assessment will be through online questions delivered using online assessment software.

Level 5

Core modules

Applied Mechanics 2
20 credits

This module will provide the means for solving many basic engineering problems by learning the principles of mechanics for rigid and deformable solid bodies.

Mechatronics
20 credits

The aim of this module is to develop a practical understanding of how sensors and actuators may be used, along with embedded systems, to control and monitor mechanical engineering systems.

Linear Electronics
10 credits

This module aims to broaden your knowledge and understanding of linear electronic circuit design, and also to provide you with the practical skills necessary to design, analyse, simulate and manufacture electronic circuits. This module will provide you with the intermediate level tools and skills necessary to design, test, implement and manufacture electronic circuits.

Control System Design and Analysis
20 credits

This module aims to develop your understanding of the modelling, application, design and analysis of control systems with Matlab/Simulin. You will learn to demonstrate an understanding of the basic concepts of dynamic system response and closed loop control, alongside the developing ability to design controllers and analyse system stability.

Electrical Engineering Practice 2
20 credits

The aim of the module is to enable you to develop the skills required to practice as a professional engineer. This module provides a broad range of experiences with an emphasis upon the systematic thinking, planning and execution required of engineers in a modern professional environment.

Applied Instrumentation
20 credits

The aim of the module is to introduce you to a graphical based programming language that enables the user to program via a CAD style environment enabling them to create virtual instruments as a base for data acquisition and instrument control.

Engineering Mathematics 2
10 credits

This module will provide a foundation in engineering mathematics for application to the solution of engineering problems.

Level 6

Core modules

Dynamics and Control
10 credits

Within this module, you will develop knowledge and experience of analytic and simulative methods applied to modelling of open and closed loop engineering systems with multi-physics dynamics.

Automation
10 credits

This module will develop your knowledge and understanding of automation systems used in manufacturing and process industries.

Autonomous Systems and Machine Learning
20 credits

The aim of this module is to study the fundamentals of computational intelligence (CI) and their potential applications in robotics, and practise some CI-based techniques in the planning and control problems.

Mechatronics and Autonomous Systems Project
40 credits

The project aims to provide a supervised but student led learning activity in the area of Mechatronics and Autonomous Systems. It aims to develop the academic, technical and organisational skills required to undertake a substantial individual engineering project from specification to conclusion.

Industrial Management
20 credits

This module is designed to develop the core management techniques required to design, implement and plan a new product or process.

Teaching and work-related learning

Excellent facilities and learning resources

We adopt an active blended learning approach, meaning you will experience a combination of face-to-face and online learning during your time at LJMU. This enables you to experience a rich and diverse learning experience and engage fully with your studies. Our approach ensures that you can easily access support from your personal tutor, either by meeting them on-campus or via a video call to suit your needs.

We have three modern electronics laboratories containing sixty-five workstations equipped with state of the art equipment, including computers with industry standard software such as Proteus, Matlab and LabVIEW. The department has two computer suites of its own, one is a sixty-seater with air conditioning, as well as access to further large computer suites in other parts of the Faculty of Engineering and Technology. Specialist facilities include a Mechatronics lab equipped with Festo automation rigs and Siemens PLCs, an Electrical Machines lab and TV and audio recording studios.

Work-related Learning

​The Department of Electronics and Electrical Engineering has a very high success rate in terms of its graduates finding employment within their chosen field of study. Employers recognise that, because of the department's strong focus on practical work, our graduates are able to make a useful contribution within a very short time-frame.

Support and guidance

Dedicated personal tutor, plus study skills support

​The Department of Electronics and Electrical Engineering is an enterprising community of 300 students and 30 staff who are dedicated to the study of electronics and electrical engineering. The department is situated in the City Campus at Byrom Street, a short walk from the city centre shops, amenities and transport links.

Assessment

Assessment varies depending on the modules you choose, but will usually include a combination of exams and coursework.

​Assessment is usually via a combination of exams and coursework, and sometimes by a portfolio of work, depending on the subject. A final year project gives you the chance to work independently and contributes considerably to your final mark. Your tutors will give prompt and constructive feedback via Canvas (our virtual learning environment), face-to-face or in writing.

​This will help you to identify your strengths as well as the areas where you may need to put in more work.

Facilities

What you can expect from your School

This programme is delivered in the Byrom Street complex of LJMU’s City Campus. Here you’ll find high quality lecture theatres, meeting and seminar rooms plus social spaces and a large café. The Avril Robarts Library, open 24/7 during semester, is just minutes away on Tithebarn Street.

Entry requirements

Please choose your qualifications below to view requirements

Minimum points required from qualifications: 112


GCSE and equivalents

Prior to starting the programme applicants must have obtained Grade C or Grade 4 or above in English Language and Mathematics GCSE or an approved alternative qualification below:

  • Key Skills Level 2 in English/Maths
  • NVQ Level 2 Functional skills in Maths and English Writing and or Reading
  • Skills for Life Level 2 in Numeracy/English
  • Higher Diploma in Maths/English
  • Functional Skills Level 2 in Maths/English
  • Northern Ireland Essential Skills Level 2 in Communication or Application of Number
  • Wales Essential Skills Level 2 in Communication or Application of Number

A Levels

  • Minimum number of A Levels required: 2
  • Subject specific requirements: Minimum of 64 UCAS points at A2-level (or equivalent) from Maths and one of the following: Physics, Chemistry, Computing, Further Maths, Electronics or Engineering.
  • Is general studies acceptable? Yes
  • Average A Level offer: BBC
  • Are AS level awards acceptable? Acceptable only when combined with other qualifications
  • Maximum AS Level points accepted: 20

T Levels

112 UCAS tariff points from relevant subjects. Please contact the Faculty for further information.

BTEC qualifications

  • National Certificate (RQF): Acceptable only when combined with other qualifications
  • National Extended Certificate: Acceptable only when combined with other qualifications
  • National Diploma (RQF): Acceptable on its own and combined with other qualifications
  • National Diploma subjects / grades required: D*D* if studied on its own or To the total of 112 UCAS points when combined with other qualifications. Engineering discipline required with a Distinction grade in Further Mathematics unit.
  • National Extended Diploma (RQF): Acceptable on its own and combined with other qualifications
  • National Extended Diploma subjects / grades required: DMM if studied on its own or To the total of 112 UCAS points when combined with other qualifications. Engineering discipline required with a Distinction grade in Further Mathematics unit.

Access to Higher Education Diploma

  • Access to Higher Education Diploma acceptability: Acceptable on its own and combined with other qualifications
  • Further information: 112 UCAS tariff points from Access to HE Diploma. Access programme must have been taken in a relevant subject area.

International Baccalaureate

  • International Baccalaureate: Acceptable on its own and combined with other qualifications
  • Additional information: 112 UCAS Tariff points including a minimum score of 5 in both Maths and Physics at higher Level

Welsh awards

  • Welsh Baccalaureate: Acceptable only when combined with other qualifications

Irish awards

  • Irish Leaving Certificate: Acceptable on its own and combined with other qualifications

Alternative qualifications considered

​Please contact the University if you have any questions regarding the relevance of your qualifications.

Will I be interviewed?

No interview required (UCAS application form only)

IELTS

6.0 (minimum of 5.5 in each component) or equivalent English language proficiency test.

International entry requirements

Find your country

Please Note: All international qualifications are subject to a qualification equivalency check.

Can this course be deferred?

Yes

Is a DBS check required?

No

Application and selection

Securing your place at LJMU

​We are looking for students who are keen to learn new skills and develop those they already possess. We want students with the ability to: be creative with ideas and concepts, moderate their creativity with logic, be enthusiastic and thirsty for knowledge, communicate effectively and confidently and understand and adapt to a wide range of issues connected with the subject. It is also important that students are able to manage time and tasks effectively as an individual and as part of a team, use appropriate sources to find and organise information and select and critically evaluate information in order to analyse problems

If you would like to develop these skills further, have a strong interest in this subject area and want to work effectively within it, then this is the course for you!  International applications will be considered in line with UK qualifications.

The University reserves the right to withdraw or make alterations to a course and facilities if necessary; this may be because such changes are deemed to be beneficial to students, are minor in nature and unlikely to impact negatively upon students or become necessary due to circumstances beyond the control of the University. Where this does happen, the University operates a policy of consultation, advice and support to all enrolled students affected by the proposed change to their course or module.

Further information on the terms and conditions of any offer made, our admissions policy and the complaints and appeals process.