Journal article

Li Q, Yuan S, Batako A, Chen B, Gao X, Li Z, Amin M. 2024. Modeling for ultrasonic vibration-assisted helical grinding of SiC particle-reinforced Al-MMCs International Journal of Advanced Manufacturing Technology, 131 :5223-5242 DOI Publisher Url

Ahuir-Torres JI, Batako ADL, Khidasheli N, Bakradze N, Zhu G. 2024. Improving Commercial Motor Bike Rim Disc Hardness Using a Continuous-Wave Infrared Fibre Laser Journal of Manufacturing and Materials Processing, 8 :18-18 DOI Publisher Url Public Url

Burduk A, Batako ADL, Machado J, Wyczółkowski R, Dostatni E, Rojek I. 2024. Preface Lecture Notes in Mechanical Engineering, :v

Baskar A, Xavior MA, Jeyapandiarajan P, Batako A, Burduk A. 2024. A novel two-phase trigonometric algorithm for solving global optimization problems Annals of Operations Research, DOI Publisher Url

Batako A. 2023. Experimental Investigation into the Effect of Magnetorheological Fluid Damper on Vibration and Chatter in Straight Turning Process Journal of Manufacturing Processes, 99 :825-847 DOI Publisher Url Public Url

Pazhani A, Venkatraman M, Anthony Xavior M, Moganraj A, Batako A, Paulsamy J, Jayaseelan J, Anbalagan A, Shanthi Bavan J. 2023. Synthesis and characterisation of graphene-reinforced AA 2014 MMC using squeeze casting method for lightweight aerospace structural applications Materials & Design, 230 DOI Publisher Url Public Url

Anthony Xavior M, Ashwath P, Batako A, Jeyapandiarajan P, Joel J, Anbalagan A. 2023. Processing and characterization of aluminium alloy 6061 graphene composite printed by direct metal laser sintering Materials Today: Proceedings, DOI Publisher Url Public Url

Li Q, Yuan S, Gao X, Zhang Z, Chen B, Li Z, Batako ADL. 2022. Surface and subsurface formation mechanism of SiCp/Al composites under ultrasonic scratching Ceramics International, 49 :817-833 DOI Publisher Url Public Url

Jayaseelan J, Pazhani A, Michael AX, Paulchamy J, Batako A, Hosamane Guruswamy PK. 2022. Characterization Studies on Graphene-Aluminium Nano Composites for Aerospace Launch Vehicle External Fuel Tank Structural Application Materials, 15 DOI Author Url Publisher Url Public Url

Ashwath P, Xavior MA, Rajendran R, Batako ADL, Jeyapandiarajan P, Joel J. 2022. Microwave-assisted T6 heat treating of aluminium alloy-Al2O3 nanocomposites MRS Communications, 12 :245-249 DOI Author Url Publisher Url Public Url

Ashwath P, Xavior MA, Batako ADL, Jeyapandiarajan P, Joel J. 2022. Selective laser melting of Al–Si–10Mg alloy: microstructural studies and mechanical properties assessment Journal of Materials Research and Technology, 17 :2249-2258 DOI Publisher Url Public Url

Burduk A, Musiał K, Balashov A, Batako A, Safonyk A. 2022. Solving scheduling problems with integrated online sustainability observation using heuristic optimization Bulletin of the Polish Academy of Sciences: Technical Sciences, 70 :1-9 DOI Publisher Url Public Url

Ashwath P, Xavior MA, Batako ADL. 2021. Processing, Characterization, and Properties of alpha-Al2O3-AA2900 Composites for Aerospace Brake Pad Applications JOM Journal of the Minerals, Metals and Materials Society, 73 :4365-4375 DOI Author Url Publisher Url Public Url

Li Z, Yuan S, Ma J, Shen J, Batako ADL. 2021. Study on the surface formation mechanism in scratching test with different ultrasonic vibration forms Journal of Materials Processing Technology, :117108-117108 DOI Author Url Publisher Url Public Url

LI Z, YUAN S, MA J, SHEN J, BATAKO ADL. 2021. Cutting force and specific energy for rotary ultrasonic drilling based on kinematics analysis of vibration effectiveness Chinese Journal of Aeronautics, DOI Publisher Url Public Url

Safonyk A, Koval S, Safonyk O, Batako ADL. 2020. Research and automation of the process of electrocoagulation wastewater treatment on the basis of the developed mathematical model Modeling, Control and Information Technologies, :59-62 DOI Publisher Url Public Url

Vereschaka A, Aksenenko A, Sitnikov N, Migranov M, Shevchenko S, Sotova C, Batako A, Andreev N. 2018. Effect of adhesion and tribological properties of modified composite nano-structured multi-layer nitride coatings on WC-Co tools life Tribology International, 128 :313-327 DOI Author Url Publisher Url Public Url

Bechcinski G, Ewad H, Tsiakoumis V, Pawlowski W, Kepczak N, McMillan A, Batako ADL. 2018. A model and application of vibratory surface grinding Journal of Manufacturing Science and Engineering, Transactions of the ASME, 140 DOI Author Url Publisher Url Public Url

Zhen L, Yuan S, Song H, Batako ADL. 2018. A cutting force model based on kinematics analysis for C/SiC in rotary ultrasonic face machining International Journal of Advanced Manufacturing Technology, 97 :1223-1239 DOI Author Url Publisher Url Public Url

Zubkov N, Poptsov V, Vasiliev S, Batako ADL. 2018. Steel Case Hardening Using Deformational cutting Journal of Manufacturing Science and Engineering, 140 DOI Author Url Publisher Url Public Url

Vereschaka A, Migranov M, Oganyan G, Sotova CS, Batako A. 2017. Application of carbide cutting tools with nano-structured multilayer composite coatings for turning austenitic steels, type 16Cr-10NI Mechanics and Industry, 18 DOI Author Url Publisher Url Public Url

Vereschaka AA, Volosova MA, Krapostin AA, Batako A, Seleznev AE. 2017. Increased Operating Properties of Cutting Ceramics by Application of Nanostructured Multilayer Wear-Resistant Coating JOURNAL OF NANO RESEARCH, 50 :90-104 DOI Author Url Publisher Url

Vereschaka AA, Grigoriev SN, Sitnikov NN, Oganyan GV, Batako ADL. 2017. Working efficiency of cutting tools with multilayer nano-structured Ti-TiCN-(Ti,Al)CN and Ti-TiCN-(Ti,Al,Cr)CN coatings: Analysis of cutting properties, wear mechanism and diffusion processes Surface and Coatings Technology, 332 :198-213 DOI Author Url Publisher Url Public Url

Vereschaka AA, Grigoriev SN, Sitnikov NN, Batako ADL. 2017. Delamination and longitudinal cracking in multi-layered composite nanostructured coatings and their influence on cutting tool life Wear, 390-39 :209-219 DOI Author Url Publisher Url Public Url

Vereschaka A, Batako ADL, Vereschaka A, Dodonov A. 2017. Development of modifying compounds for multilayer nano-structured coatings for cutting tools International Journal of Nanotechnology, 14 :574-583 DOI Author Url Publisher Url Public Url

Vereschaka AA, Vereschaka AS, Batako ADL, Mokritskii BJ, Aksenenko AY, Sitnikov NN. 2017. Improvement of structure and quality of nanoscale multilayered composite coatings, deposited by filtered cathodic vacuum arc deposition method Nanomaterials and Nanotechnology, 7 DOI Author Url Publisher Url Public Url

Grigoriev SN, Vereschaka AA, Fyodorov SV, Sitnikov NN, Batako ADL. 2016. Comparative analysis of cutting properties and nature of wear of carbide cutting tools with multi-layered nano-structured and gradient coatings produced by using of various deposition methods International Journal of Advanced Manufacturing Technology, DOI Author Url Publisher Url Public Url

Vereschaka AA, Grigoriev SN, Volosova MA, Batako ADL, Vereschaka AS, Sitnikov NN, Seleznev AE. 2016. Nano-scale multi-layered coatings for improved efficiency of ceramic cutting tools International Journal of Advanced Manufacturing Technology, DOI Author Url Publisher Url Public Url

Vereschaka AA, Vereschaka AS, Batako ADL, Hojaev OK, Mokritskii BY. 2016. Development and research of nanostructured multilayer composite coatings for tungsten-free carbides with extended area of technological applications International Journal of Advanced Manufacturing Technology, :1-9 DOI Author Url Publisher Url Public Url

Vereshchaka AA, Batako ADL, Sotova ES, Vereshchaka AS. 2016. Nanostructured Multilayer Composite Coatings on Ceramic Cutting Tools for Finishing Treatment of High-Hardness Quenched Steels Metal Science and Heat Treatment, 57 :614-619 DOI Author Url Publisher Url Public Url

Volkhonskii AO, Blinkov IV, Vereshchaka AA, Vereshchaka AS, Batako ADL. 2015. Filtered cathodic vacuum Arc deposition of nano-layered composite coatings for machining hard-to-cut materials International Journal of Advanced Manufacturing Technology, DOI Author Url Publisher Url Public Url

Vereschaka , Volosova MA, Vereshchaka AS, Batako ADL, Mokritskii BY. 2015. Development of wear-resistant coatings compounds for high-speed steel tool using a combined cathodic vacuum arc deposition International Journal of Advanced Manufacturing Technology, DOI Author Url Publisher Url Public Url

Batako ADL, Tsiakoumis V. 2015. An experimental investigation into resonance dry grinding of hardened steel and nickel alloys with element of MQL International Journal of Advanced Manufacturing Technology, 77 :27-41 DOI Author Url Publisher Url Public Url

Vereshchaka AA, Sotova ES, Batako AD, Sedykh MI, Vereshchaka AS. 2014. A study of the cutting properties and wear mechanism of ceramic edge tools with nanostructure multilayer composite coatings JOURNAL OF FRICTION AND WEAR, 35 :483-488 DOI Author Url Publisher Url Public Url

Al-Roubaiy AO, Nabat SM, Batako ADL. 2014. Experimental and theoretical analysis of friction stir welding of Al-Cu joints INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 71 :1631-1642 DOI Author Url

Batako ADL, Goh SY. 2014. Workpiece roundness profile in the frequency domain: an application in cylindrical plunge grinding International Journal of Advanced Manufacturing Technology, 72 :277-288 DOI Author Url Publisher Url

Vereshchaka AA, Vereshchaka AS, Mgaloblishvili O, Morgan MN, Batako AD. 2014. Nano-scale multilayered-composite coatings for the cutting tools INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 72 :303-317 DOI Author Url

Al-Roubaiy AO, Nabat SM, Batako ADL. 2014. Experimental and theoretical analysis of friction stir welding of Al-Cu joints International Journal of Advanced Manufacturing Technology, 71 :1631-1642 DOI Publisher Url

Vereschaka AA, Grigoriev SN, Vereschaka AS, Popov AY, Batako AD. 2014. Nano-scale multilayered composite coatings for cutting tools operating under heavy cutting conditions Dornfeld D, Helu M. 6TH CIRP INTERNATIONAL CONFERENCE ON HIGH PERFORMANCE CUTTING (HPC2014), 14 :239-244 DOI Author Url Publisher Url

Vereshchaka AA, Vereshchaka AS, Mgaloblishvili O, Morgan MN, Batako AD. 2014. Nano-scale multilayered-composite coatings for the cutting tools International Journal of Advanced Manufacturing Technology, 72 :303-317 DOI Publisher Url

Batako ADL, Goh SY. 2014. Workpiece roundness profile in the frequency domain: An application in cylindrical plunge grinding International Journal of Advanced Manufacturing Technology, 72 :277-288 DOI Publisher Url

Tsiakoumis V, Batako AD. 2013. Vibration assisted surface grinding of mild and hardened steel: Performance of a novel vibrating jig design Proceedings of the 37th International MATADOR 2012 Conference, :185-188

Batako ADL, Morgan MN, Rowe BW. 2013. High efficiency deep grinding with very high removal rates International Journal of Advanced Manufacturing Technology, 66 :1367-1377 DOI

Morgan MN, Barczak L, Batako A. 2012. Temperatures in fine grinding with minimum quantity lubrication (MQL) International Journal of Advanced Manufacturing Technology, 60 :951-958 DOI Author Url Publisher Url

Grigor'ev SN, Kuzin VV, Burton D, Batako AD. 2012. Influence of thermal loads on the stress-strain state of aluminum-oxide ceramic cutting plates Russian Engineering Research, 32 :473-477 DOI Publisher Url

Barczak LM, Batako AD. 2012. Application of minimum quantity lubrication in grinding Materials and Manufacturing Processes, 27 :406-411 DOI Author Url Publisher Url

Grigor'ev SN, Kuzin VV, Burton D, Batako AD. 2012. Influence of ceramic properties on the stress-strain state of a plate in steady heat conduction Russian Engineering Research, 32 :374-379 DOI Publisher Url

Sharp MC, Yadav R, Batako A, French PW. 2012. Fibre laser cleaning of grinding wheels Key Engineering Materials, 496 :55-60 DOI Author Url Publisher Url

Grigor'ev SN, Kuzin VV, Morgan MN, Batako A. 2012. Influence of loads on the stress-strain state of aluminum-oxide ceramic cutting plates Russian Engineering Research, 32 :61-67 DOI Author Url Publisher Url

Batako ADL, Morgan MN, Rowe BW. 2012. High efficiency deep grinding with very high removal rates International Journal of Advanced Manufacturing Technology, :1-11 DOI Author Url Publisher Url

Grigor’ev SN, Kuzin VV, Burton D, Batako AD. 2012. Influence of thermal loads on the stress-strain state of aluminum-oxide ceramic cutting plates Russian Engineering Research, 32 :473-477

Tsiakoumis V, Batako AD. 2012. Vibration assisted surface grinding of mild and hardened steel: Performance of a novel vibrating jig design Proceedings of the 37th International Matador Conference, :185

Godaliyadde D, Phylip-Jones G, Yang ZL, Batako AD, Wang J, Godaliyadde MM. 2011. A subjective risk management approach for modelling of failure induced ship vibrations JOURNAL OF MARINE ENGINEERING AND TECHNOLOGY, 10 :3-16 DOI Author Url Publisher Url

Morgan MN, Barczak L, Batako A. 2011. Temperatures in fine grinding with minimum quantity lubrication (MQL) International Journal of Advanced Manufacturing Technology, :1-8

Barczak LM, Batako ADL, Morgan MN. 2010. A study of plane surface grinding under minimum quantity lubrication (MQL) conditions International Journal of Machine Tools and Manufacture, 50 :977-985 DOI Author Url Publisher Url

Godaliyadde D, Godaliyadde LB, Phylip-Jones G, Yang ZL, Batako AD, Wang J. 2010. A Subjective Multiple Criteria Decision-Making Approach for Modeling Ship Hull Vibration MARINE TECHNOLOGY SOCIETY JOURNAL, 44 :25-42 DOI Author Url Publisher Url

Godaliyadde D, Phylip-Jones G, Yang ZL, Batako AD, Wang J. 2010. A Subjective Risk-Estimation Approach for Modeling Ship Hull Vibration JOURNAL OF SHIP RESEARCH, 54 :95-108 Author Url

Godaliyadde D, Godaliyadde LB, Phylip-Jones G, Yang ZL, Batako AD, Wang J. 2010. A subjective multiple criteria decision-making approach for modeling ship hull vibration Marine Technology Society Journal, 44 :25-42 DOI

Batako ADL. 2010. High Efficiency Deep Grinding, an Application with conventional wheels Proceedings of the 36th International MATADOR Conference, :93 DOI Author Url Publisher Url

Barczak LM, Batako ADL. 2010. Plane surface grinding with application of Minimum Quantity Lubrication (MQL) Proceedings of the 36th International MATADOR Conference, :109 DOI Author Url Publisher Url

Baines-Jones VA, Morgan MN, Batako AD, Brown E. 2009. The role of computational fluid dynamics for coolant delivery in industrial grinding of steels and cast iron Laser Metrology and Machine Performance IX - 9th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM and Robotic Performance, LAMDAMAP 2009, :368-376

Godaliyadde D, Godaliyadde DDK, Phylip-Jones G, Yang ZL, Batako AD, Wang J. 2008. A Subjective Cost-Benefit Analysis Approach for Selecting Ship Propulsion Systems MARINE TECHNOLOGY SOCIETY JOURNAL, 42 :69-86 DOI Author Url Publisher Url

Batako ADL, Piiroinen PT. 2008. Friction-driven vibro-impact system for percussive-rotary drilling: a numerical study of the system dynamics PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 222 :1925-1934 DOI Author Url Publisher Url

Baines-Jones VA, Morgan MN, Batako AD, Brown E. 2008. MODELLING AND SIMULATION OF GRINDING FLUID NOZZLES 6th International Conference on Manufactoring Research,

Morgan MN, Jackson AR, Wu H, Baines-Jones V, Batako A, Rowe WB. 2008. Optimisation of fluid application in grinding CIRP ANNALS-MANUFACTURING TECHNOLOGY, 57 :363-366 DOI Author Url Publisher Url

Batako ADL, Lalor MJ, Piiroinen PT. 2007. Numerical bifurcation analysis of a friction-driven vibro-impact system JOURNAL OF SOUND AND VIBRATION, 308 :392-404 DOI Author Url Publisher Url

Batako ADL, Koppal S. 2007. Process monitoring in high efficiency deep grinding- HEDG Journal of Physics: Conference Series, 76 DOI Publisher Url

Godaliyadde D, Phylip-Jones G, Batako AD, Wang J. 2006. Risk analysis of ship hull vibration using evidential reasoning 2nd GERI Annual Research Symposium,

Batako AD, Rowe WB, Morgan MN. 2005. Temperature measurement in high efficiency deep grinding INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 45 :1231-1245 DOI Author Url Publisher Url

Batako ADL, Morgan MN, Rowe WB, Walton IM. 2005. Temperature measurement in high efficiency deep grinding (HEDG) using enhanced single pole thermocouple and PVD coating techniques Laser Metrology and Machine Performance VII - 7th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM and Robotic Performance, LAMDAMAP 2005, :332-343

Batako AD, Babitsky VI, Halliwell NA. 2004. Modelling of vibro-impact penetration of self-exciting percussive-rotary drill bit Journal of Sound and Vibration, 271 :209-225 DOI Author Url Publisher Url

Morgan MN, Rowe WB, Batako A. 2004. Energy limitations in HEDG and conventional grinding Pearce T, Gao Y, Tamaki J, Kuriyasawa T. ADVANCES IN ABRASIVE TECHNOLOGY VI, 257-258 :63-68 DOI Author Url Publisher Url

Morgan MN, Rowe WB, Batako A. 2004. I Mechanics of Grinding Processes: Modeling, Simulation, and Characterization-Energy Limitations in HEDG and Conventional Grinding Key Engineering Materials, 257 :63-68

Batako AD, Babitsky VI, Halliwell NA. 2003. A self-excited system for percussive-rotary drilling Journal of Sound and Vibration, 259 :97-118 DOI Author Url Publisher Url

Rowe WB, Morgan MN, Batako A, Jin T. 2003. Energy and temperature analysis in grinding Keynote Paper, Sixth Int. Conf. And Exhibition on Laser Metrology, Machine Tool CMM and Robot Performance–LAMDAMAP, :1-4

van Zon H, Batako A, Kreslavska A. 2000. [BOOK REVIEW] SOCIAL AND ECONOMIC CHANGE IN EASTERN UKRAINE, THE EXAMPLE OF ZAPORIZHZHYA Slavic Review, 59 :208-209

Baines-Jones VA, Morgan MN, Allanson DR, Batako ADL. Grinding Fluid Delivery System Design-Nozzle Optimisation

Batako ADL. A vibro-Impact System Sustained Friction with Engineering Application

preprint

Sychev S, Batako ADL. 2024. A Study of Sliding Friction Using Acoustic Emission and Wavelet-Based Energy Approach MDPI AG DOI Publisher Url

Books (edited)

2024. Intelligent Systems in Production Engineering and Maintenance III Burduk A, Batako A, Machado J, Wyczółkowski W, Dostatni E, Rojek I. Springer Nature Switzerland 9783031442810

2022. Advances in Manufacturing Processes, Intelligent Methods and Systems in Production Engineering Progress in Application of Intelligent Methods and Systems in Production Engineering Batako A, Burduk, A, Karyono, K, Chen, X, Wyczółkowski R. LNNS, volume 335 978-3-030-90532-3 DOI Publisher Url

Conference publication

Anbalagan A, Venugopal A, Anthony XM, Pazhani A, Batako A. 2024. Novel Machining Configuration of Carbon Fibre Reinforced Polymer (CFRP) Using Wire Electric Discharge Machining (WEDM) Lecture Notes in Mechanical Engineering, :16-24 DOI Publisher Url

Wondimu A, Batako ADL, Alemu N, Gemechu H, Xavior A. 2023. 16th global congress on manufacturing and management GCMM 2022 an investigation into rail joint structural design challenges Materials Today: Proceedings, DOI Publisher Url

Ahuir-Torres JI, Sharp M, Bakradze N, Batako ADL. 2022. Microstructural Design of the Cast Iron via Laser Hardening with Defocused Beam of the Continuous Wave CO2 Laser Journal of Physics: Conference Series, 15th Global Congress on Manufacturing and Management (GCMM 2021) 2198 :012048-012048 DOI Publisher Url Public Url

Zhang XF, Lu AX, Wang Y, Batako ADL. 2022. Development of New Vitrified Bond for Diamond Grinding of Polycrystalline Diamond Compacts Lecture Notes in Networks and Systems, 335 LNNS :624-631 DOI Publisher Url

Tipparthi VK, Novovic D, Chen X, Batako ADL. 2022. Design and Development of a Dual Flow System for Fluid Delivery in Grinding Application Lecture Notes in Networks and Systems, 335 LNNS :370-380 DOI Publisher Url

Khidasheli N, Gordeziani G, Gvazava S, Tavadze G, Tabidze R, Batako ADL. 2022. Influence of Structural Parameters on the Wear Resistance of ADI During Dry Sliding Friction Lecture Notes in Networks and Systems, 335 LNNS :109-116 DOI Publisher Url

Turmanidze R, Popkhadze G, Batako ADL. 2022. Improving the Efficiency of Mechatronic Systems for a Rapid Adoption and Integration of Industry 4.0 Lecture Notes in Networks and Systems, 335 LNNS :288-303 DOI Publisher Url

Ibrahim EE, Ewad H, Chen X, Batako ADL. 2022. Grinding of Titanium Alloys (Ti-6Al-4V) Using Vibration Assisted Machining Lecture Notes in Networks and Systems, 335 LNNS :86-94 DOI Publisher Url

Shvangiradze M, Inasharidze K, Batako ADL. 2022. Application of Basalt Fibre Composites for Wind Turbine Journal of Physics: Conference Series, 2198 DOI Publisher Url

Ashwath P, Anthony Xavior M, Jeyapandiarajan P, Joel J, Batako A. 2022. Surface Finish and Property Evaluation of Direct Metal Laser Sintered (DMLS) Al-Si-10Mg alloy Journal of Physics: Conference Series, 2198 DOI Publisher Url

Batako ADL, Burduk A, Xavior MA. 2022. New Advancement in Manufacturing, Materials and Production Engineering towards Industry 4.x Journal of Physics: Conference Series, 2198 DOI Publisher Url

Safonyk A, Tarhonii I, Burduk A, Batako A. 2022. Modelling and automation of a process for obtaining coagulum in treatment of industrial Journal of Physics: Conference Series, 2198 DOI Publisher Url

Jalagonia N, Bakradze N, Darakhvelidze N, Sanaia E, Bokuchava G, Kuchukhizdef T, Batako AD. 2022. Experimental Investigation into a New Method of scalable production of Reduced Graphene Oxide for potential industrial graphene nanocomposite manufacture Journal of Physics: Conference Series, 2198 DOI Publisher Url

Wang S, Yan S, Lin J, Batako AD. 2022. Study on the effects of laser quenching power and scanning speed on the property of cast iron Journal of Physics: Conference Series, 2198 DOI Publisher Url

Balashov A, Dybala B, Burduk A, Batako ADL. 2022. FEA study of Residual stress in composite materials in Abrasive Waterjet machining Journal of Physics: Conference Series, 2198 DOI Publisher Url

Afio A, Lolo K, Drovou S, Kassegne K, Dl Batako A. 2022. Improvement of the flow of polyethylene terephtalate (PET) by interposition of ball strata at the inlet of the spinning die Journal of Physics: Conference Series, 2198 DOI Publisher Url

Wotodzo KF, Kassegne KA, Koffi D, Tiem S, Batako A. 2021. A numerical simulation of the influence of torque on the performance of composite gears MATERIALS TODAY-PROCEEDINGS, 3rd International Conference on Materials, Manufacturing and Modelling (ICMMM) 46 :7561-7569 DOI Author Url Publisher Url

Safonyk A, Prysiazhniuk O, Prysiazhniuk I, Batako A. 2021. Modeling of the singularly perturbed process of convection-diffusion heat and mass transfer in multilayer media MATERIALS TODAY-PROCEEDINGS, 3rd International Conference on Materials, Manufacturing and Modelling (ICMMM) 46 :7244-7250 DOI Author Url Publisher Url

Al-Roubaiy AO, Nabat SM, Batako ADL. 2020. An Investigation into Friction Stir Welding of Aluminium Alloy 5083-H116 Similar Joints MATERIALS TODAY-PROCEEDINGS, 2nd International Conference on Materials Manufacturing and Modelling (ICMMM) 22 :2140-2152 DOI Author Url Publisher Url

Ibrahim EE, Checkley M, Chen X, Sharp M, Liang W, Yuan S, Batako ADL. 2019. Process Performance of Low Frequency Vibratory Grinding of Inconel 718 Yarlagadda PKDV, Xavior AM, Gibson I, Zhu Y. DIGITAL MANUFACTURING TRANSFORMING INDUSTRY TOWARDS SUSTAINABLE GROWTH, 14th Global Congress on Manufacturing and Management (GCMM) 30 :530-535 DOI Author Url Publisher Url

Kadja K, Drovou S, Kassegne KA, Pizzi A, Sanda K, Batako ADL. 2019. Development and Investigation into Properties of composite Particleboard of Iroko and African Locust Bean Pod Yarlagadda PKDV, Xavior AM, Gibson I, Zhu Y. DIGITAL MANUFACTURING TRANSFORMING INDUSTRY TOWARDS SUSTAINABLE GROWTH, 14th Global Congress on Manufacturing and Management (GCMM) 30 :188-193 DOI Author Url Publisher Url

Afio A, Komikadja , Dlbatako A. 2019. Study of PMMA Transition Interphase by Ring-Shear Method Materials Today: Proceedings, 22 :2132-2139 DOI Publisher Url

Vereschaka AA, Grigoriev S, Sitnikov NN, Bublikov JI, Batako ADL. 2018. Effect produced by thickness of nanolayers of multilayer composite wear-resistant coating on tool life of metal-cutting tool in turning of steel AISI 321 Procedia CIRP, 8th CIRP Conference on High Performance Cutting (HPC 2018) 77 :549-552 DOI Author Url Publisher Url Public Url

Vereschaka AA, Batako AD, Krapostin AA, Sitnikov NN, Oganyan GV. 2017. Improvement in reliability of ceramic cutting tool using a damping system and nano-structured multi-layered composite coatings Tseng MM, Tsai HY, Wang Y. MANUFACTURING SYSTEMS 4.0, 50th CIRP Conference on Manufacturing Systems 63 :563-568 DOI Author Url Publisher Url

Vereschaka AA, Popov AY, Vereschaka AS, Batako AD, Sitnikov NN, Tverdokhlebov AS. 2016. Development of a cutting tool for high-performance cutting of railway rolling components Wertheim R, Ihlefeldt S, Hochmuth C, Putz M. 7TH HPC 2016 - CIRP CONFERENCE ON HIGH PERFORMANCE CUTTING, 7th CIRP Conference on High Performance Cutting (HPC) 46 :360-363 DOI Author Url Publisher Url

Vereschaka A, Vereschaka A, Klauch D, Lytkin D, Batako A. 2016. High-efficiency machining of materials used in heavy power engineering Wertheim R, Ihlefeldt S, Hochmuth C, Putz M. 7TH HPC 2016 - CIRP CONFERENCE ON HIGH PERFORMANCE CUTTING, 7th CIRP Conference on High Performance Cutting (HPC) 46 :356-359 DOI Author Url Publisher Url

Batako ADL, Ewad H, Bechcinski G, Pawlowski W. 2016. Vibro-Impact Machining - An Application in Surface Grinding Goh YM, Case K. ADVANCES IN MANUFACTURING TECHNOLOGY XXX, 14th International Conference on Manufacturing Research (ICMR) 3 :25-30 DOI Author Url

Alharbi WN, Batako A, Gomm B. 2016. Development of PID Controller for Vibratory Milling Goh YM, Case K. ADVANCES IN MANUFACTURING TECHNOLOGY XXX, 14th International Conference on Manufacturing Research (ICMR) 3 :187-192 DOI Author Url

Khidasheli N, Beradze G, Bakradze N, Dumbadze T, Batako ADL. 2016. Factors Influencing Structural Properties of Low Silicon Bainite Cast Irons Goh YM, Case K. ADVANCES IN MANUFACTURING TECHNOLOGY XXX, 14th International Conference on Manufacturing Research (ICMR) 3 :119-124 DOI Author Url

Aneli JN, Bakradze NV, Dumbadze TN, Batako ADL. 2016. Structural Transformations of Polymers Using Laser Irradiation Goh YM, Case K. ADVANCES IN MANUFACTURING TECHNOLOGY XXX, 14th International Conference on Manufacturing Research (ICMR) 3 :31-36 DOI Author Url

Naumov AG, Vereschaka AA, Batako AD, Vereschaka AS. 2016. Environmentally Friendly Technological System of Cutting Using Magnetic Microcapsules and Cutting Tools with Nanoscale Composite Coating Procedia CIRP, 41 :829-834 DOI Publisher Url

Batako ADL, Adaskin AM, Butrim VN, Vereschaka AA, Vereschaka AS. 2016. Influence of carbide substrate properties on wear resistance of tool with multilayer coating in machining of chromium-based heat-resistant alloy Materials Science Forum, 876 :59-68 DOI Publisher Url

Naumov A, Vereschaka A, Batako A, Vereschaka A. 2016. System of High-performance Cutting with Enhanced Combined Effect of Cooling and Lubrication Medium Based on Ranque-hilsch Effect Procedia CIRP, 57 :457-460 DOI Publisher Url

Jones M, Dujic D, Levi E, Batako A, Mgaloblishvili O. 2007. Novel five-leg inverter PWM technique for two-motor centre-driven winders IEEE IEMDC 2007: PROCEEDINGS OF THE INTERNATIONAL ELECTRIC MACHINES AND DRIVES CONFERENCE, VOLS 1 AND 2, IEEE International Electric Machines and Drives Conference (IEMDC 2007) :254-+ DOI Author Url Publisher Url

Rowe WB, Morgan MN, Batako A, Jin T. 2003. Energy and temperature analysis in grinding Ford DG. LASER METROLOGY AND MACHINE PERFORMANCE VI, 6th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM and Robot Performance (LAMDAMAP 2003) :3-23 Author Url

BATAKO A, BATAKO D. Energy requirement in HEDG ISAAT

Goh SY, Batako ADL. A Study of Workpiece Roundness Profile Frequency Components in Cylindrical Plunge Grinding Baines TS, Clegg BT, Harison DK. 10th International Conference on Manufacturing Research ICMR2012 2 :511-516

Batako ADL, Tsiakoumis V, Grigor’ev S, Kuzin V. Grinding Wheel Wear in Vibration Assisted Grinding of Steel Baines TS, Clegg BT, Harison DK. Advanced in Manufacturing Technology XXVI, 10th International Conference on Manufacturing Research ICMR 2012 2 :517-522

Kuzin VV, Grigor’ev SN, Burton DR, Batako ADL. A New Generation of Ceramic Cutting Tools Baines TS, Clegg BT, Harison DK. Advanced in Manufacturing Technology XXVI, 10th International Conference on Manufacturing Research ICMR 2012 2 :523-528

Batako ADL, Kuzin VV, Rowe B. New Development In High Efficiency Deep Grinding American Society of Mechanical Engineers DOI Author Url Publisher Url

Batako ADL. New Development In High Efficiency Deep Grinding Bernard A. 2012-proceedings-of-the-asme-11th-biennial-Conference on Engineering Systems Design and Analysis (ESDA2012), American Society of Mechanical Engineers 4 :81-87 Publisher Url

Tsiakoumis V, Batako ADL. Vibration Assisted Grinding Of Mild And Hardened Steel: A Novel Design Vibrating Jig And Process Performance Bernard A. 2012 Proceedings of the ASME 11th Biennial Conference on Engineering Systems Design and Analysis (ESDA2012), American Society of Mechanical Engineers 4 :141-146 DOI Author Url Publisher Url

Ewad H, Checkley M, Batako DLA, Batako A. Development of Control System for Vibratory Grinding Process Procedia Engineering 174 ( 2017 ) 1093 – 1099, Global Congress on Manufacturing and Management :1093-1099

Books (authored)

Burduk A, Batako A, Machado J, Wyczółkowski R, Antosz K, Gola A. 2023. Advances in Production Intelligent Systems in Production Engineering and Maintenance Springer Nature 9783031450211

Yuan S, Biermann D, Batako A. 2022. Application of MQL technology in grinding. Basic theory, technology and application of MQL China Machine Press 978-7-111-70664-9

Burduk A, Batako ADL, Chen X, Karyono K, Wyczókowski R. 2018. Preface 335 LN American Chemical Society 9783030905316 DOI Publisher Url

Van Zon H, Batako A, Kreslavaska A. 2018. Social and economic change in Eastern Ukraine: The example of Zaporizhzhia :1-182 9781138386211 DOI Publisher Url

Batako ADL. Friction Driven System for Vibro-Impact Rotary Rock Drilling VDM Verlag Dr. Müller 978-3639243970

Other

Burduk A, Batako ADL, Machado J, Antosz K, Gola A, Wyczółkowski R. 2023. Preface Lecture Notes in Networks and Systems, 790 LNNS :v-vi

Barczak L. 2010. Application of Minimum Quantity Lubrication (MQL) in Plane Surface Grinding DOI Public Url

Batako ADL. 2003. A self-exciting system for percussive-rotary drilling

Chapters

Musiał K, Balashov A, Burduk A, Batako A, Safonyk A. 2022. Solving Scheduling Problems in Case of Multi-objective Production Using Heuristic Optimization :13-24 9783030993092 DOI Publisher Url

Vereschaka A, Batako A. Delamination and Longitudinal Cracking in Multilayered Composite Nanostructured Coatings and Their Influence on Cutting Tool Wear Mechanism and Tool Life INTECHOPEN DOI Publisher Url

Grigoriev SN, Vereschaka AA, Volosova MA, Vereschaka AS, Batako A. Improved Efficiency of Ceramic Cutting Tools in Machining Hardened Steel - An Application with Nano-Dispersed Multi-Layered Coatings handbook of Modern Coating Technologies, Elsevier; 50 pages DOI Publisher Url

Report

Batako A. A collection of outputs of three years Research Collaboration with Moscow State University STANKIN and Liverpool John Moores University

External PGR Supervision - completed students:

School of Mechanical Engineering & Automation, BEIHANG University, Beijing, China, PhD, Mechanism and Process Research on Ultrasonic Vibration-assisted Grinding of SiC Particle-reinforced Aluminum Matrix Composites. 2023

School of Mechanical Engineering & Automation, BEIHANG University, Beijing, China, PhD, Rotary Ultrasonic Machining of C/SiC Ceramic Matrix Composite: Theoretical and Experimental Investigations. 2019

Other Professional Activity:

Keynote speech, GCMM2023. 2023

Keynote Speech, ICMMM2023. 2023

Adviser to Togo government on Education Reform in Togo.

Keynote Speech at theInternational Conference on Materials, Manufacturing and Modelling (ICMMM) 2019.

Conference organisation:

Fourth International Conference on Intelligent Systems in Production Engineering and Maintenance ISPEM 2023, Co-organiser, https://ispem.pwr.edu.pl/. 2023

The 11th International Conference on Creative Technology (ICCT-2023), Co-organiser, https://www.businesseventsthailand.com/en/event-calendar/detail/1321-the-11th-international-conference-on-creative-technology-icct-2023. 2023

International Conference on Materials, Manufacturing and Modelling ICMMM2023, Co-organiser, http://icmmm-vit.com/#speakers. 2023

15th Global Congress on Manufacturing and Management, Host and Conference Chair, https://www.ljmu.ac.uk/conferences/gcmm2020.. 2021

GARS, organising committee and chair, http://www.ljmu.ac.uk/GERI/Conferences/gars/79376.htm. 2005

External PGR examinations performed:

NATIONAL INSTITUTE OF TECHNOLOGY TIRUCHIRAPPALLI, India, PhD, STUDIES ON DEFORMATION BEHAVIOUR DURING END MILLING OF ALUMINUM THIN WALLS. 2023

Vellore Institute of Technology, India, PhD, MICROSTRUCTURAL AND TRIBOLOGICAL STUDIES OF CNT MIXED CONVENTIONAL THERMALLY SPRAYED CERAMIC COATINGS. 2022

Vellor Institute of Technology, India, PhD, MACHINABILITY STUDIES ON Al7075 BASED HYBRID COMPOSITES REINFORCED WITH SILICON CARBIDE, BORON CARBIDE, GRAPHENE AND CNT. 2021

Homi Bhabha National Institute, India, PhD, Acoustic emission signal characterization and infrared thermography studies during drilling of metal matrix composites. 2021

University of Lorraine, France, PhD, Contributions to data-driven model-based identification for bearings remaining useful life estimation. 2020

Other invited event:

The 11th International Conference on Creative Technology (ICCT-2023), Bangkok, Keynote speech. 2023

Editorial boards:

IJEI - International Journal of Engineering Innovations, Editor. 2023

Modeling, control and information technologies - MCIT, EDITORIAL BOARD MEMBER. 2020

Elsevier Heliyon, editorial board. 2016

Journal of Technology of Metalls.

MDPI , Materials, Guest Editor.

Springer Nature, Guest editor, https://link.springer.com/book/10.1007/978-3-030-90532-3.

Springer Nature, Guest Editor, https://link.springer.com/book/10.1007/978-3-031-45021-1.

Public engagement:

Public talk or lecture, Cambridge council local adults, Invited speaker, Women’s Voices for Africa - Bridging diversity with Technology & Innovation. 2022

External collaboration:

Wroclaw University of Science and Technology, Prof. Anna Burduk. 2019

http://www.p.lodz.pl/en/mainen,menu154,presentations_index.htm, Lodz Tecnhnical university, Poland, Institute of Machine Tool. 2015

Moscow State Technological University «Stankin», Professor Valery V. Kuzin. 2012

Institute of Abrasives and Grinding Research Zhengzhou, China, Dr Xiaofu Zhang. 2009

Beiling BEHANG Univeristy of Aeronautics and Austronautics, Dept. Mechanical Engineering.

Georgian Technical University, Tbilisi, Prof. Nana Bakradze.

Lorraine University, Metz National School of Engineers, Prof. Kondo Adjallah.

Nanjing University of Science and Technology, Prof. WANG.

Sokhumi Institute of Physics and technology, Georgia, Dr Natia Jalagonia.

University of Lome, Togo, Prof. Komla Kassegne.

External committees:

Global Congress on Manufacturing and Management, Global Congress on Manufacturing and Management, Member of the International Board. 2016

IOSEA, IOSEA - International Organisation for Sciences & Engineering in Africa, Board member.

Steering Committee of the IET Merseyside & western Cheshire, IET - The Institute Of Engineering and Technology, Steering committee member.

Media Coverage:

BBC Radio Merseyside - Interview and discussion on how to motivate youth from minority background 2016

Research Grants Awarded:

Rolls Royce Plc, Investigation into vibration assisted grinding of advanced materials, X Chen, Grant value (£): 56,700, Duration of research project: 36months. 2013

Rolls Royce, Investigation into Coolant Nozzles and MQL, Grant value (£): 15,000, Duration of research project: 36 months. 2012

TSB, Vibration assisted High Efficiency Deep Gringing - A Strategy for Eco Machining, Grant value (£): 218551, Duration of research project: 14 months. 2009

Technology Strategy Board, Vibration Assisted High Efficiency Deep Grinding- A Strategy for Eco-Machining, Grant value (£): 218550. 2009

Award:

Best ICMR 2012 Paper Award, ICMR 2012. 2012

Conference presentation:

A STUDY OF WORKPIECE ROUNDNESS PROFILE FREQUENCY COMPONENTS IN CYLINDRICAL PLUNGE GRINDING, International conference on Manufacturing research, Aston University Birmingham, Oral presentation. 2012

Keynote, International Conference on Materials, Manufacturing and Modelling (ICMMM) 2019, Oral presentation.

Teaching qualification:

PGCert-TLHE, SEDA certificate. 2006

PGR Cert. Learning and Teaching in Higher Education. 2006

Industrial connections:

Bosch Rexroth Montion controls, Development of Vibro-HEDG Machine tool.

Jones & Shipman Machine Tools, Development of Vibro-HEDG machine tool.

Rolls Royce Plc, Fluid Delivery Nozzle Design Vibration assisted Grinding of Aerospace materials.