Liverpool Skyline

General Engineering Research Institute

Prof Xun Chen

Prof Xun Chen

Telephone: 0151 231 2169

website
LinkedIn
ORCID

Biography

Professor Xun Chen is an international leading expert in advanced manufacturing technology. Currently he leads the Advanced Manufacturing Technology Research Laboratory in the General Engineering Research Institute, Liverpool John Moores University.

With broad research experience in mechanical manufacturing engineering, Professor Chen has established his expertise in advanced manufacturing technology including application of computing science, mechatronics and artificial intelligence to manufacturing process monitoring, control and optimisation, particularly to abrasive machining technology. Up to date he has published more than 200 research papers widely in top international journals and conferences in the field of Mechanical Manufacturing Engineering. His researches have been extensively supported by the research councils and industries.

Professor Chen has been a member of the EPSRC Peer Review College and a founding member of the International Committee of Abrasive Technology. He has been an associate editor and an editorial board member of many leading international journals.

Languages

English
Chinese (Mandarin)

Degrees

Liverpool John Moores University, United Kingdom, PhD, Mechanical manufacturing engineering

Academic appointments

Professor in Manufacturing, Liverpool John Moores University, 2012 - present

Postgraduate training

Postgraduate Certificate in Academic Practice, United Kingdom, University of Nottingham, ? - present

Publications

Conference publication

Chen X, Tokucoglu H, El Rhalibi A, Opoz T. 2019. Sensor Based Cost Modelling for a Knowledge Support System Development IEEE International conference on automation and computing DOI Public Url

Ibrahim EE, Checkley M, Chen X, Sharp M, Liang W, Yuan S, Batako ADL. 2019. Process Performance of Low Frequency Vibratory Grinding of Inconel 718 Yarlagadda PKDV, Xavior AM, Gibson I, Zhu Y. DIGITAL MANUFACTURING TRANSFORMING INDUSTRY TOWARDS SUSTAINABLE GROWTH, 14th Global Congress on Manufacturing and Management (GCMM) 30 :530-535 DOI Author Url

Chen X. 2016. Functional microstructural surface manufacturing and assessment Public Url

Oluwajobi AO, Chen X. 2016. Choosing Appropriate Interatomic Potentials for Nanometric Molecular Dynamics (MD) Simulations Key Engineering Materials, 686 :194-199 DOI

Oluwajobi AO, Chen X. 2016. On Atomic Surface Roughness Evaluation Key Engineering Materials, 686 :200-203 DOI

Chen X, Morgan MN. 2016. ADVANCES IN QUALITY AND PRODUCTIVITY IN PRECISION GRINDING -A REVIEW OF SELECTED RESEARCH PROCEEDINGS OF THE ASME 11TH INTERNATIONAL MANUFACTURING SCIENCE AND ENGINEERING CONFERENCE, 2016, VOL 1, 11th ASME International Manufacturing Science and Engineering Conference (MSEC) DOI Author Url

Chen X. 2016. Adaptive grinding strategy development Materials Science Forum, 874 :64-69 DOI

Opoz TT, Chen X. 2014. Single Grit Scratch Tests To Explore The Material Removal Mechanism In Grinding At Micro Scale The 16th International Conference on Machine Design and Production, The 16th International Conference on Machine Design and Production 1 :525-539

Opoz TT, Chen X. 2013. Comparison of Material Removal Characteristics in Single and Multiple Edges Scratches The 16th International Symposium on Advances in Abrasive Technology (ISAAT 2013)

Opoz TT, Chen X. 2013. Experimental and Numerical Study on Scratching Test Proceeding of the 11th International Conference on Manufacturing Research (ICMR13), 11th International Conference on Manufacturing Research (ICMR13)

Opoz TT, Chen X. 2012. Grinding Surface Creation Simulation Using Finite Element Method and Molecular Dynamics The 10th Asia-Pacific Conference on Materials Processing (APCMP2012)

Chen X, Mohamed A, Oluwajobi A. 2012. Investigation of AE Features in Grinding Ball A, Mishra R, Gu F, Rao BKN. 25TH INTERNATIONAL CONGRESS ON CONDITION MONITORING AND DIAGNOSTIC ENGINEERING (COMADEM 2012), 25th International Congress on Condition Monitoring and Diagnostic Engineering (COMADEM) 364 DOI Author Url

Oluwajobi A, Chen X. 2012. Multi-Pass Nanometric Machining Simulation using the Molecular Dynamics (MD) Morgan MN, Shaw A, Mgaloblishvili O. PRECISION MACHINING VI, 6th International Congress of Precision Machining (ICPM 2011) 496 :241-246 DOI Author Url

Oluwajobi A, Chen X. 2012. THE EFFECT OF THE VARIATION OF TOOL END GEOMETRY ON MATERIAL REMOVAL MECHANISMS IN NANOMACHINING Kundrak J, Varga G, Deszpoth I. 13TH INTERNATIONAL CONFERENCE ON TOOLS, 13th International Conference on Tools (ICT 2012) :71-76 Author Url

Oluwajobi A, Chen X. 2012. ACOUSTIC EMISSION DETECTION SIGNALS IN THE EXPERIMENTAL VALIDATION OF NANOMETRIC MACHINING SIMULATIONS Kundrak J, Varga G, Deszpoth I. 13TH INTERNATIONAL CONFERENCE ON TOOLS, 13th International Conference on Tools (ICT 2012) :395-400 Author Url

Chen X, Mohamed A, Folkes J. 2011. Grinding monitoring through thermal acoustic emission signatures Tawakoli T. ADVANCES IN ABRASIVE TECHNOLOGY XIV, 14th International Symposium on Advances in Abrasive Technology (ISAAT 2011) 325 :287-+ DOI Author Url

Opoz TT, Chen X. 2010. Finite element simulation of chip formation Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10

Opoz TT, Chen X. 2010. An Investigation of the Rubbing and Ploughing in Single Grain Grinding using Finite Element Method 8th International Conference on Manufacturing Research

Opoz TT, Chen X. 2010. Numerical Simulation of Single Grit Grinding 16th International Conference on Automation & Computing

Chen X, Oepoez TT. 2010. Simulation of Grinding Surface Creation - A Single Grit Approach Liao YS, Chen CCA, Chao CL, Tso PL. ADVANCES IN ABRASIVE TECHNOLOGY XIII, 13th International Symposium on Advances in Abrasive Technology/1st Cross-Strait Conference on Precision Machining 126-128 :23-28 DOI Author Url

Mohammed A, Folkes J, Chen X. 2010. Detection of High and Low Temperature in the Grinding Zone using Laser Irradiation Technique Hinduja S, Li L. PROCEEDINGS OF THE 36TH INTERNATIONAL MATADOR CONFERENCE, 36th International MATADOR Conference :97-100 DOI Author Url

Opoz TT, Chen X. 2009. Finite element simulation of grinding process and micro-scale abrasive wear Proceedings of Computing and Engineering Annual Researchers' Conference 2009: CEARC’09

Chen X, Griffin J. 2009. Grinding Burn and Chatter Classification Using Genetic Programming Kuriyagawa T, Zhou L, Yan J, Yoshihara N. ADVANCES IN ABRASIVE TECHNOLOGY XI, 11th International Symposium on Advances in Abrasive Technology 389-390 :90-+ DOI Author Url

Guo L, Chen X. 2007. Acoustic emission from high efficiency deep grinding of engineering ceramics ICRM 2007 - 4th International Conference on Responsive Manufacturing,

Jackson MJ, Khangar A, Chen X, Robinson GM, Venkatesh VC, Dahotre NB. 2007. Laser cleaning and dressing of vitrified grinding wheels JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 3rd International Conference on Advanced Manufacturing Technology (ICMAT) 185 :17-23 DOI Author Url

Jackson MJ, Robinson GM, Chen X. 2006. Laser surface preparation of vitrified grinding wheels JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 4th International Surface Engineering Congress and Exposition 15 :247-250 DOI Author Url

Feng Z, Chen X. 2006. Grinding wheel loading features extracted by image processing Cai G, Xu XP, Kang R. ADVANCES IN GRINDING AND ABRASIVE TECHNOLOGY XIII, 13th Conference on Abrasive Technology in China 304-305 :14-18 DOI Author Url

Sun DY, Chen X, Du FS, Zhu GM, Zhou JG. 2005. Dynamic thickness simulation of five-stand continuous cold rolling JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, International Forum on the Advances in Materials Processing Technology 167 :218-223 DOI Author Url

Wang Y, Chen X, Gindy N. 2005. Fixturing error measurement and analysis using CMMs Jiang XJ, Whitehouse DJ. 7th International Symposium on Measurement Technology and Intelligent Instruments, 7th Symposium on Measurement Technology and Intelligent Instruments 13 :163-166 DOI Author Url

Chen X, Wang Y, Liu Q, Gindy N. 2004. A method of clamping optimisation for machining fixture Hinduja S. PROCEEDINGS OF THE 34TH INTERNATIONAL MATADOR CONFERENCE, 34th International MATADOR Conference :51-56 Author Url

Chen X, Limchimchol T, Hussain S, Liu G. 2004. Remote process monitoring through Internet Cheng K, Webb D, Marsh R. ADVANCES IN E-ENGINEERING AND DIGITAL ENTERPRISE TECHNOLOGY-I, PROCEEDINGS, 4th International Conference on e-Engineering and Digital Enterprise Technology (e-ENGDET) :401-407 Author Url

Chen X, Feng Z, Pashby I. 2003. AI(2)O(3) grinding wheel cleaning using Nd : YAG laser Qin Y, Juster N. ADVANCES IN MANUFACTURING TECHNOLOGY - XVII, 1st International Conference on Manufacturing Research (ICMR2003) Incorporating with the 19th National Conference on Manufacturing Research (NCMR) :27-31 Author Url

Wang Y, Chen X, Liu Q, Gindy N. 2003. Fixture evaluation based on CMM Ford DG. LASER METROLOGY AND MACHINE PERFORMANCE VI, 6th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM and Robot Performance (LAMDAMAP 2003) :231-241 Author Url

Chen X. 2001. The sharpness of grinding wheel Pham DT, Dimov SS, OHagan V. ADVANCES IN MANUFACTURING TECHNOLOGY - XV, 17th National Conference on Manufacturing Research :137-142 Author Url

Chen X, Feng Z, Thomson G. 2001. Grinding wheel cleaning using CO2 laser Pham DT, Dimov SS, OHagan V. ADVANCES IN MANUFACTURING TECHNOLOGY - XV, 17th National Conference on Manufacturing Research :161-166 Author Url

Liu Q, Wang Y, Geldart M, Chen X, Gindy N. 2001. The developing status of condition monitoring systems in grinding processes Cheng K, Webb D. ADVANCES IN MANUFACTURING TECHNOLOGY-XVI, 18th National Conference on Manufacturing Research :533-537 Author Url

Chen X. 2001. Knowledge structure issues for manufacturing technology Cheng K, Webb D. ADVANCES IN MANUFACTURING TECHNOLOGY-XVI, 18th National Conference on Manufacturing Research :261-265 DOI Author Url

Chen X, Rowe WB, McCormack DF. 2000. Analysis of the transitional temperature for tensile residual stress in grinding JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 15th International Conference on Computer-Aided Production Engineering (CAPE'99) 107 :216-221 DOI Author Url

Chen X, Allanson DR, Rowe WB. 1998. Life cycle model of the grinding process COMPUTERS IN INDUSTRY, Advanced Summer Institute on Life Cycle Approaches to Production Systems - Management, Control, Supervision (ASI 96) 36 :5-11 DOI Author Url

Chen X, Rowe WB. 1998. Modelling surface roughness improvement in grinding Baines RW, TalebBendiab A, Zhao Z. ADVANCES IN MANUFACTURING TECHNOLOGY XII, 14th National Conference on Manufacturing Research :37-42 Author Url

Rowe WB, Li Y, Chen X, Mills B. 1997. An intelligent multiagent approach for selection of grinding conditions CIRP ANNALS 1997 MANUFACTURING TECHNOLOGY, VOLUME 46/1/1997, 47th General Assembly of CIRP - Manufacturing Technology 46 :233-238 DOI Author Url

Opoz TT, Chen X. Single Grit Grinding Simulation by Using Finite Element Analysis American Institute of Physics Conf. Proc: Advances in Materials and Processing Technologies AMPT2010 International Conference 1315 :1467-1472

Chen X, Li LIJUN, Wu QIAOPING. Effects of Abrasive Grit Shape on Grinding Performance Xplore, the 23rd International Conference on Automation & Computing, DOI Public Url

Journal article

García Plaza E, Chen X, Ait Ouarab L. 2019. Abrasive Feature Related Acoustic Emission in Grinding Xplore, IEEE International conference on automation and computing, :163-168 DOI Public Url

Chen Y, Chen X, AIOuarab L, Opoz T, Xu XP, Yu G. 2019. Morphology Analysis and Characteristics Evaluation of Typical Super Abrasive Grits in Micron Scale Journal of Superhard Materials, 41 :189-200 DOI Author Url Publisher Url Public Url

Chen X, Cao H, Li H. 2018. Dressing Strategy and Grinding Control for Cylindrical Microstructural Surface International Journal of Advanced Manufacturing Technology, 99 :707-727 DOI Author Url Publisher Url Public Url

Chen Y, Chen X, Xu X, Yu G. 2018. Quantitative impacts of regenerative vibration and abrasive wheel eccentricity on surface grinding dynamic performance International Journal of Advanced Manufacturing Technology, 96 :2271-2283 DOI Author Url Publisher Url Public Url

Chen X, Chi Y, Li H. 2017. In-process monitoring and analysis of bearing outer race way grinding based on the power signal Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 231 :2622-2634 DOI Author Url Publisher Url Public Url

Chen X, Opoz T, Oluwajobi A. 2017. Analysis of grinding surface creation by single grit approach Journal of Manufacturing Science and Engineering, 139 DOI Author Url Public Url

Oluwajobi AO, Chen X. 2017. On Time Step in the Molecular Dynamics (MD) Simulation of Nanomachining Solid State Phenomena, 261 :108-114 DOI Public Url

Chen X, Opoz T. 2016. Effect of different parameters on grinding efficiency and its monitoring by acoustic emission Production & Manufacturing Research, 4 :190-208 DOI Public Url

Opoz TT, Chen X. 2016. Chip Formation Mechanism Using Finite Element Simulation STROJNISKI VESTNIK-JOURNAL OF MECHANICAL ENGINEERING, 62 :636-646 DOI Author Url Public Url

Griffin J, Chen X. 2016. Real-time simulation of neural network classifications from characteristics emitted by acoustic emission during horizontal single grit scratch tests JOURNAL OF INTELLIGENT MANUFACTURING, 27 :507-523 DOI Author Url

Opoz TT, Chen X. 2015. Experimental study on single grit grinding of Inconel 718 Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, DOI Author Url Publisher Url Public Url

Griffin J, Chen X. 2014. Real-time fuzzy-clustering and CART rules classification of the characteristics of emitted acoustic emission during horizontal single-grit scratch tests INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 74 :481-502 DOI Author Url

Griffin J, Chen X. 2014. Real-time fuzzy-clustering and CART rules classification of the characteristics of emitted acoustic emission during horizontal single-grit scratch tests International Journal of Advanced Manufacturing Technology, 74 :481-502 DOI Publisher Url

Oluwajobi AO, Chen X. 2014. Is There a Limit to Nanoscale Mechanical Machining? Kundrak J, Maros Z. PRECISION MACHINING VII, 581 :316-+ DOI Author Url

Morgan MN, Moruzzi JJ, Allanson DR, Chen X. 2014. On the Development of Machine Controller Systems with Enhanced Facility for Process Monitoring Integration Kundrak J, Maros Z. PRECISION MACHINING VII, 581 :533-+ DOI Author Url

Chen X, Öpöz TT. 2014. Characteristics of material removal processes in single and multiple cutting edge grit scratches International Journal of Abrasive Technology, 6 :226-242 DOI

Abas A, Mellor J, Chen X. 2014. Non-intrusive drowsiness detection by employing Support Vector Machine Luo X, Cao Y, Tong Z. PROCEEDINGS OF THE 2014 20TH INTERNATIONAL CONFERENCE ON AUTOMATION AND COMPUTING (ICAC'14), :188-+ DOI Author Url

Chen X, Öpöz TT. 2013. Comparison of material removal characteristics in single and multiple cutting edge scratches Advanced Materials Research, 797 :189-195 DOI Author Url

Oluwajobi AO, Chen X. 2013. Effects of interatomic potentials on the determination of the minimum depth of cut in nanomachining International Journal of Abrasive Technology, 6 :16-39 DOI

Oluwajobi A, Chen X. 2013. The effect of interatomic potentials on the onset of plasticity in the molecular dynamics (MD) simulation of nanometric machining Key Engineering Materials, 535-536 :330-333 DOI Author Url

Öpöz TT, Chen X. 2013. Acoustic emission features of material removal during single grit scratching ICAC 2013 - Proceedings of the 19th International Conference on Automation and Computing: Future Energy and Automation, :223-228

Öpöz TT, Chen X. 2012. Experimental investigation of material removal mechanism in single grit grinding International Journal of Machine Tools and Manufacture, 63 :32-40 DOI Author Url

Oluwajobi AO, Chen X. 2012. The effect of the variation of velocity on the molecular dynamics simulation of nanomachining ICAC 12 - Proceedings of the 18th International Conference on Automation and Computing: Integration of Design and Engineering, :238-243 Author Url

Chen X, Alabed A. 2012. Genetic programming for grinding surface roughness modelling Advanced Materials Research, 565 :183-189 DOI Author Url

Oluwajobi A, Chen X. 2012. Determination of the minimum depth of cut in nanometric machining using molecular dynamics simulation Advanced Materials Research, 565 :570-575 DOI Author Url

Chen X, Öpöz TT, Oluwajobi A. 2012. Grinding surface creation simulation using finite element method and molecular dynamics Advanced Materials Research, 500 :314-319 DOI Author Url

Öpöz TT, Chen X. 2012. Influential parameters in determination of chip shape in high speed machining Key Engineering Materials, 496 :211-216 DOI Author Url

Öpöz TT, Chen X. 2011. Process monitoring and metrology for single grit grinding test performance Proceedings of 2011 17th International Conference on Automation and Computing, ICAC 2011, :143-148

Oluwajobi AO, Chen X. 2011. The effect of depth of cut on the Molecular Dynamics (MD) simulation of multi-pass nanometric machining Proceedings of 2011 17th International Conference on Automation and Computing, ICAC 2011, :40-45

Oluwajobi A, Chen X. 2011. The effect of interatomic potentials on the molecular dynamics simulation of nanometric machining International Journal of Automation and Computing, 8 :326-332 DOI

Öpöz TT, Chen X. 2010. Single grit grinding simulation by using finite element analysis AIP Conference Proceedings, 1315 :1467-1472 DOI Author Url

Guo L, Sheng XM, Chen X. 2010. Investigation of Acoustic Emission signals features under a simulative environment of grinding burn Hunan Daxue Xuebao/Journal of Hunan University Natural Sciences, 37 :155-159

Oluwajobi AO, Chen X. 2010. The fundamentals of modelling abrasive machining using molecular dynamics International Journal of Abrasive Technology, 3 :354-381 DOI

Griffin JM, Chen X. 2009. Multiple classification of the acoustic emission signals extracted during burn and chatter anomalies using genetic programming INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 45 :1152-1168 DOI Author Url

Guo L, Yin S, Li B, Chen X. 2009. Feature investigation of acoustic emission signals under a simulative environment of grinding burn Zhongguo Jixie Gongcheng/China Mechanical Engineering, 20 :413-416

Chen X. 2009. Corrective abrasive polishing processes for freeform surface Key Engineering Materials, 404 :103-112 DOI

Griffin J, Chen X. 2009. Characteristics of the acoustic emission during horizontal single grit scratch tests: Part 1 characteristics and identification International Journal of Abrasive Technology, 2 :25-42 DOI

Griffin J, Chen X. 2009. Characteristics of the acoustic emission during horizontal single grit scratch tests: Part 2 classification and grinding tests International Journal of Abrasive Technology, 2 :43-59 DOI

Obi S, Chen X, Blunt L. 2009. Effect of polishing angle on material removal rate and surface finish using bonded abrasive pads Laser Metrology and Machine Performance IX - 9th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM and Robotic Performance, LAMDAMAP 2009, :347-356

Liu Q, Chen X, Gindy N. 2008. Robust design and optimisation of aerospace alloy grinding by different abrasive wheels INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 39 :1125-1135 DOI Author Url

Hussain S, Chen X. 2008. Remote milling tool-wear monitoring and direct wear features extraction by image processing International Journal of Internet Manufacturing and Services, 1 :246-261 DOI

Liu Q, Chen X, Wang Y, Gindy N. 2008. Empirical modelling of grinding force based on multivariate analysis JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 203 :420-430 DOI Author Url

Wang Y, Chen X, Gindy N, Xie J. 2008. Elastic deformation of a fixture and turbine blades system based on finite element analysis INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 36 :296-304 DOI Author Url

Wang Y, Hodgson A, Chen X, Gindy N. 2008. A methodology for the development of machining fixtures for components with complicated geometry INTERNATIONAL JOURNAL OF COMPUTER INTEGRATED MANUFACTURING, 21 :848-856 DOI Author Url

Liu Q, Chen X, Gindy N. 2007. Evaluation of superalloy heavy-duty grinding based on multivariate tests PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 221 :1421-1430 DOI Author Url

Jackson MJ, Robinson GM, Chen X. 2007. Laser processing of high performance grinding wheels International Journal of Manufacturing Technology and Management, 12 :3-24

Chen X, Griffin J, Liu Q. 2007. Mechanical and thermal behaviours of grinding acoustic emission International Journal of Manufacturing Technology and Management, 12 :184-199

Feng Z, Chen X. 2007. Image processing of the grinding wheel surface INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 32 :452-458 DOI Author Url

Feng Z, Chen X. 2007. Image processing of grinding wheel surface INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 32 :27-33 DOI Author Url

Chen X, Griffin J. 2007. Grinding acoustic emission classification in terms of mechanical behaviours Key Engineering Materials, 329 :15-20 DOI

Wang Y, Chen X, Gindy N. 2007. Surface error decomposition for fixture development INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 31 :948-956 DOI Author Url

Liu Q, Chen X, Gindy N. 2007. Assessment of Al2O3 and superabrasive wheels in nickel-based alloy grinding INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 33 :940-951 DOI Author Url

Wang Y, Chen X, Liu Q, Gindy N. 2006. Optimisation of machining fixture layout under multi-constraints INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 46 :1291-1300 DOI Author Url

Liu Q, Chen X, Gindy N. 2006. Investigation of acoustic emission signals under a simulative environment of grinding burn INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 46 :284-292 DOI Author Url

Griffin J, Chen X. 2006. Classification of the acoustic emission signals of rubbing, ploughing and cutting during single grit scratch tests International Journal of Nanomanufacturing, 1 :189-209 DOI

Jackson MJ, Chen X. 2005. Reducing wear of abrasive wheels grinding aerospace alloys by laser assisted cleaning Proceedings of the World Tribology Congress III - 2005, :939-940

Liu Q, Chen X, Gindy N. 2005. Fuzzy pattern recognition of AE signals for grinding burn INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 45 :811-818 DOI Author Url

Chen X, Rowe WB, Cai R. 2002. Precision grinding using CBN wheels INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 42 :585-593 DOI Author Url

Chen X. 2002. The sharpness of grinding wheels: an important measure of grinding behaviour PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 216 :829-832 DOI Author Url

Chen X, Rowe WB, McCormack DF. 2000. Predicting the transitional boundary of tensile residual stress in grinding Abrasives, :28-35

Chen X, Rowe WB, McCormack DF. 1999. Predicting onset of tensile residual stress in grinding Technical Paper - Society of Manufacturing Engineers. AD, :1-10

Chen X, Rowe WB, Allanson DR, Mills B. 1999. A grinding power model for selection of dressing and grinding conditions JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, 121 :632-637 DOI Author Url

Li Y, Rowe WB, Chen X, Mills B. 1999. Study and selection of grinding conditions Part 2: a hybrid intelligent system for selection of grinding conditions PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 213 :131-142 DOI Author Url

Chen X, Rowe WB. 1999. Modelling surface roughness improvement in grinding PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 213 :93-96 DOI Author Url

Chen X, Rowe WB, Mills B, Allanson DR. 1998. Analysis and simulation of the grinding process. Part IV: Effects of wheel wear INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 38 :41-49 DOI Author Url

Rowe WB, Chen X. 1997. Characterization of the size effect in grinding and the sliced bread analogy INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH, 35 :887-899 DOI Author Url

Allanson DR, Rowe WB, Chen X, Boyle A. 1997. Automatic dwell control in computer numerical control plunge grinding PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 211 :565-575 DOI Author Url

Rowe WB, Li Y, Chen X, Mills B. 1996. Case-based reasoning for selection of grinding conditions COMPUTER INTEGRATED MANUFACTURING SYSTEMS, 9 :197-205 Author Url

Chen X, Rowe WB, Mills B, Allanson DR. 1996. Analysis and simulation of the grinding process .3. Comparison with experiment INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 36 :897-906 DOI Author Url

Chen X, Rowe WB. 1996. Analysis and simulation of the grinding process .1. Generation of the grinding wheel surface INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 36 :871-882 DOI Author Url

Chen X, Rowe WB. 1996. Analysis and simulation of the grinding process .2. Mechanics of grinding INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 36 :883-896 DOI Author Url

Chen X, Rowe WB, Li Y, Mills B. 1996. Grinding vibration detection using a neural network PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 210 :349-352 DOI Author Url

CHEN X, ALLANSON D, THOMAS A, MORUZZI JL, ROWE WB. 1994. SIMULATION OF FEED CYCLES FOR GRINDING BETWEEN CENTERS INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 34 :603-616 DOI Author Url

Mohammed A, Folkes J, Chen X. Detection of Grinding Temperatures Using Laser Irradiation and Acoustic Emission Sensing Technique MATERIALS AND MANUFACTURING PROCESSES, 27 :395-400 DOI Author Url

Chen X, Hu Z, Wang C, Liu J. A novel forming method for three-dimensional thin sheet metal Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, DOI Author Url Public Url

Allanson DR, Chen X, Rowe WB. Life cycle model of grinding process Computers in Industry, 36 :5-11 DOI

Allanson DR, Rowe WB, Chen X, Boyle A. Automatic Control of Dwell Time in CNC Plunge Grinding Operations Proceedings of the Thirty-Second International Matador Conference, :325-330 DOI

Allanson DR, Rowe WB, Chen X. The Coolant Coupling Method Applied to Touch Dressing in High Frequency Internal Grinding Proceedings of the Thirty-Second International Matador Conference, :337-340 DOI

Chen X, Oluwajobi AO. Characterization of Atomic Surface Roughness in Nanometric Machining Molecular Dynamics (MD) Simulations Current Nanoscience, DOI Author Url Public Url

Chen X, Oluwajobi AO. Molecular Dynamics (MD) Simulation of Multi-pass Nanometric Machining – The Effect of Machining Conditions Current Nanoscience, DOI Author Url Public Url

Chen X, Sufian M, Yu D. Investigating the Capability of Precision in Robotic Grinding Xplore, the 23rd International Conference on Automation & Computing, DOI Public Url

Chen Y, Chen X, Xu X, Yu G. Effect of Energy Consumption in Contact Zone on Machining Conditions Optimization in Precision Surface Grinding Journal of Mechanical Engineering, DOI Author Url Publisher Url Public Url

Editorial/letter to the editor

Jackson MJ, Cheng K, Chen X. 2017. Special Issue: Grinding Technology-Commemorating the Scientific Contributions by Professor Stephen Malkin JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, 139 DOI Author Url

Book

Chen X, Chen WH. 2011. Proceedings of 2011 17th International Conference on Automation and Computing, ICAC 2011: Preface 9781467300001

Chen X, Liu Q, Gindy N. 2005. Signal analysis of acoustic emission for laser imitating grinding burn Tamaki J, Kuriyagawa T, Baron YM. 291-292 :91-96 TRANS TECH PUBLICATIONS LTD DOI Author Url

Wang Y, Chen X, Gindy N. 2005. Deformation analysis of fixturing for workpiece with complex geometry 291-292 :631-636 TRANS TECH PUBLICATIONS LTD DOI Author Url

Liu Y, Chen X. 2004. A study on the abrasive water jet cutting for granite 257-258 :527-532 TRANS TECH PUBLICATIONS LTD DOI Author Url

Chen X, Feng Z, Pashby I. 2004. Comparison of laser cleaning of Al2O3 and CBN grinding wheels 257-258 :365-370 TRANS TECH PUBLICATIONS LTD DOI Author Url

Chen X, Feng Z, Pashby I. 2004. A study on laser cleaning of Al2O3 grinding wheels 257-258 :359-364 TRANS TECH PUBLICATIONS LTD DOI Author Url

Chen X, Feng ZM. 2003. Effectiveness of laser cleaning for grinding wheel loading 238-2 :289-294 TRANS TECH PUBLICATIONS LTD DOI Author Url