2022/23 entry

BEng (Hons) Marine and Mechanical Engineering with Foundation Year

Start date:

September 2022

Study mode:

Full time

Course Duration:

4 years, 5 years with placement

UCAS code:

1Q34

Points required:

88

Campus:

City

Tuition fees (per year)

Home (full-time):
£9,250
International (full-time):
£16,600
Placement (home student):
£1,850
Placement (international student):
£3,650
All figures are subject to yearly increases.
Tuition fees are subject to parliamentary approval.

General enquiries:

0151 231 5090

Faculty of Engineering and Technology:

0151 231 2777

fetadmissions@ljmu.ac.uk

International enquiries

international@ljmu.ac.uk

Send a message >

Why study Marine and Mechanical Engineering with Foundation Year at Liverpool John Moores University?

  • Excellent student support from academic tutors, technical staff and student mentors in both practical and academic activities throughout all levels of study
  • Professionally-accredited, design-led engineering curriculum emphasises developing understanding through application
  • Teaching is supported by well-equipped laboratories and workshops with state-of-the-art software and excellent technical support
  • Professional engineers regularly contribute to courses, and industrial visits provide insights into careers in professional engineering and you also have the option of completing an industrial placement
  • The foundation year allows progression to our BEng Marine and Mechanical Engineering programme which is Accredited by the Institution of Mechanical Engineers and approved by the Maritime and Coastguard Agency, giving exemption from theoretical components of the Engineering Officer of the Watch (EOOW) professional qualifications, up to and including the level of Chief Engineer

About your course

The BEng (Hons) Marine and Mechanical Engineering and with Foundation Year at Liverpool John Moores University is the ideal course if you are interested in this subject but lack the necessary qualifications to study it at degree level.

About the Foundation Year

The Foundation Year is ideal if you have the ability to study for a degree but don’t have the qualifications to enter directly onto the Mechanical and Marine Engineering honours degree programme. Once you pass the Foundation Year you will progress directly onto the first year of the honours degree. If you are a full-time UK student, you will qualify for student financial support for the full duration of your course (subject to eligibility criteria).

About the BEng (Hons) Mechanical and Marine Engineering degree

This degree will give you an in-depth understanding of the scientific principles and advanced design technology as well as the problem solving and management skills required to be a successful marine engineer.

This is one of the UK’s leading engineering schools, with a supportive staff team and excellent facilities including engine test facilities, full marine engine room and bridge simulators,  materials testing laboratories and digital design studios, which you have full use of in practical sessions. Links with national and international companies such as Bibby Line, Rolls Royce, Shell and Castrol mean that the course is tailored to the needs of employers and, as an extension of this, we offer you the opportunity to undertake a year’s paid placement in industry.

"Professional engineers regularly contribute to courses while industrial visits will give you insights into careers in professional engineering."

Professional accreditation/links

Both the BEng and MEng degrees in Marine Engineering are accredited by the Institution of Mechanical Engineers and provide the educational base for graduates to gain Chartered Engineer (CEng) status.

Accredited MEng degrees enable graduates to gain CEng status without further study, while accredited BEng degrees will require a further period of study after graduation. If you have demonstrated consistently strong performance at the end of Level 5, you may be offered the opportunity to transfer to the MEng programme. Gaining professional status will be of considerable benefit to you in your future career especially if you join a multinational company and/or need to have your qualification recognised overseas.

The Department has held over 30 years of continuous professional accreditation by the Institution of Mechanical Engineers.

The MEng and BEng in Mechanical and Marine Engineering programmes can both lead to marine engineering officer of the watch certification and academic exemption from Class 1 and 2 Engineering Certificates of Competency issued by the MCA.

Fees and funding

There are many ways to fund study for home and international students

Fees

The fees quoted above cover registration, tuition, supervision, assessment and examinations as well as:

  • Library membership with access to printed, multimedia and digital resources
  • Access to programme-appropriate software
  • Library and student IT support
  • Free on-campus wifi via eduroam

Additional costs

Although not all of the following are compulsory/relevant, you should keep in mind the costs of:

  • accommodation and living expenditure
  • books (should you wish to have your own copies)
  • printing, photocopying and stationery
  • PC/laptop (should you prefer to purchase your own for independent study and online learning activities)
  • mobile phone/tablet (to access online services)
  • field trips (travel and activity costs)
  • placements (travel expenses and living costs)

Money

  • student visas (international students only)
  • study abroad opportunities (travel costs, accommodation, visas and immunisations)
  • academic conferences (travel costs)
  • professional-body membership
  • graduation (gown hire etc)

Funding

There are many ways to fund study for home and international students. From loans to International Scholarships and subject-specific funding, you’ll find all of the information you need on our specialist funding pages.

Employability

You can expect to enjoy excellent career prospects in the UK and internationally.

Marine Engineers find employment in a variety of areas in the maritime industry both shore based and sea-going. Specific employment sectors include marine surveying (with companies including Lloyds of London), ship and port operations, offshore structures, petrochemicals, offshore renewable energy, and power generation.

Recent graduate roles include Sea-going Chief Engineer, Marine Superintendent, Power Plant Manager, Marine Surveyor, and Petrochemical Plant Manager.

Careers, Employability and Enterprise Service

We are committed to ensuring all of our students experience a transformation in their employability skills and mindset and their career trajectory. A wide range of opportunities and support is available to you, within and beyond your course.

Every undergraduate curriculum includes Future Focus, an e-learning resource and workshop designed to help you to develop personal insight into your talents, passion and purpose. It will enable you to become more proactive, adaptable and resilient in your awareness and approach to career possibilities. You’ll be encouraged to engage with personal and professional development opportunities.

A suite of learning experiences, services and opportunities is available to final year students to help ensure you leave with a great onward plan and the means to make it a reality.

Our Centre for Entrepreneurship can help you to grow your enterprise skills and to research, plan and start your own business. You also have access to Careers Zone 24/7, LJMU’s state-of-the-art suite of online tools and resources; opportunities for flexible, paid and part-time work through Unitemps, themed webinars; an annual programme of employer events; funded extracurricular internships and one-to-one advice to accelerate your job search, CV and interview technique.

Applicant key information

Course review and revalidation.

This course is currently undergoing its scheduled programme review, which may impact the advertised modules. Programme review is a standard part of the University’s approach to quality assurance and enhancement, enabling us to ensure that our courses remain up to date and maintain their high standard and relevancy.

Once the review is completed, this course website page will be updated to reflect any approved changes to the advertised course. These approved changes will also be communicated to those who apply for the course to ensure they wish to proceed with their application.

A life-changing experience 

There's so much more to university than just studying for a degree.

News and views

Browse through the latest stories and updates from the University and beyond

What you will study on this degree

Please see guidance on core and option modules for further information on what you will study.

Further guidance on modules

Modules are designated core or option in accordance with professional body requirements, as applicable, and LJMU’s Academic Framework Regulations.

Whilst you are required to study core modules, optional modules are also included to provide you with an element of choice within the programme. The availability of optional modules may vary from year to year and will be subject to meeting minimum student numbers.

Where changes to modules are necessary these will be communicated as appropriate.

Please see the programme specification document for further details on this course:

Programme specification document (PDF)

Level 3

Core modules

Algorithms and Computing
10 credits

This module aims to provide an introduction to technical computing and the application of computers in the implementation of simple algorithms.

Engineering and Technology Practice
20 credits

This module aims to develop your practical skills by applying what you learn in your mathematics and physics modules. It will provide an experience of experimental planning, execution and report writing, as well as activities aimed at developing problem solving skills.

Foundation Mathematics for Engineering and Technology 1
20 credits

This module aims to provide you with the mathematical knowledge, understanding and skills which are required to use mathematics as an analytical tool in engineering and technology subjects.

Foundation Mathematics for Engineering and Technology 2
20 credits

This module aims to build upon the material covered in Mathematics 1 by exploring more advanced topics in Mathematics. This includes an introduction to elementary techniques in Calculus.

Foundation Physics - Mechanics, Materials and Waves
20 credits

The aim of this module is to provide the required knowledge regarding mechanics, materials and waves needed for those who have not studied A-level physics to be able to study an engineering or technology related degree.

Foundation Physics - Particles, Fields and Electricity
20 credits

The aim of this module is to provide the required knowledge regarding particles, fields, electricity and electronics needed for those who have not studied A-level physics to be able to study an engineering or technology related degree.

Programming
10 credits

This module will introduce you to the software development process in order to be able to use a range of computer programming environment and their applications. You will also be able to develop problem solving skills in computing and wider engineering or technology areas.

Level 4

Core modules

Engineering Mathematics 1a
10 credits

This module will provide a foundation in engineering mathematics for its application to the solution of engineering problems.

Engineering Mathematics 1b
10 credits

This module will provide a foundation in engineering mathematics for its application to the solution of engineering problems.

Applied Mechanics 1
20 credits

This module will introduce you to the essential principles of applied mechanics. The module will provide you with an introduction to essential applied mechanics (static force systems, strength of materials, kinematics, dynamics, impulse and momentum).

Thermodynamics and Fluid Mechanics 1
20 credits

The aim of this module is to introduce you to the essential principles of Thermodynamics and Fluid Mechanics. This module introduces some of the most important fundamental ideas behind the development of core engineering disciplines of thermodynamics and fluid mechanics. 

Materials
20 credits

This module covers the essential elements of materials science and manufacturing technology required by engineers studying mechanical, marine, design disciplines. You will develop a good understanding on the structures, properties and processing methods of different groups of materials and be able to apply basic techniques for materials testing and selection.

Engineering Practice 1
20 credits

This module aims to introduce you to a range of general engineering practices and standards.

Electrical and Electronic Engineering
20 credits

This module will enable you to develop an understanding of the physical principles of electrical and electronic systems, and to analyse simple circuits which incorporate passive and active components.

Level 5

Core modules

Engineering Mathematics 2
10 credits

This module will provide a foundation in engineering mathematics for application to the solution of engineering problems and provides a basis in advanced engineering mathematics  in mechanical and electrical engineering.

Materials and Processes
10 credits

The aim of this module is to gain a thorough understanding of the properties and applications of a range of structural engineering materials and their associated manufacturing processes.

Applied Mechanics 2
20 credits

This module will provide the means for solving many basic engineering problems by learning the principles of mechanics for rigid and deformable solid bodies.

Thermodynamics and Fluid Mechanics 2
20 credits

This module will provide an insight into thermal plant cycles and the physical behaviour of fluid flow and heat transfer by application of the theory to practical engineering examples.

Engineering Practice 2
20 credits

The aim of this module is to develop the skills required to practice as a professional engineer. This module provides a broad range of experiences including laboratory's and report writing skills required of a professional engineer.

Marine Electrical Systems
20 credits

The aim of this module is to provide a comprehensive introduction to Marine Instrumentation and Electrical Engineering. The module will concentrate on the principles, construction and operation of marine instrumentation, ac and dc motors and generators, and associated distribution and protection systems.

Marine Design and Technology
20 credits

This module will provide a comprehensive introduction to Marine Engineering, Naval Architecture and Ship Construction. The module will concentrate on main and auxiliary propulsion systems, ship stability and construction features.

Level 6

Core modules

Engineering Project
40 credits

The project aims to provide a supervised but independent led learning activity in a relevant area of engineering or technology. It aims to develop the academic, technical and organisational skills required to undertake a substantial individual engineering project from specification to conclusion.

Engineering Analysis
20 credits

The module will introduce computational engineering analysis using finite element analysis (FEA) and computational fluid dynamics (CFD) and will extend your experience and skill with the aid of industry standard software.

Industrial Management
20 credits

This module is designed to develop the core management techniques required to design, implement and plan a new product or process.

Marine Design and Propulsion
20 credits

The module aims to analyse many of the critical marine systems associated with ships including aspects of safety within the marine industry.

Optional modules

Fluid Dynamics and Heat Transfer
10 credits

The aim of this module is to further develop the essential principles of Fluid Dynamics and Heat Transfer.

Thermodynamics
10 credits

This module will introduce the essential principles of Thermodynamics and Fluid Mechanics and will take an in-depth look into the operation and thermodynamic cycle of engineering plant. 

Materials Engineering
10 credits

The aim of the module is to provide an in-depth understanding of advanced engineering materials together with techniques for material property and performance improvements.

Structural Integrity
10 credits

This module will enable you to develop an understanding of the performance of materials and structures subjected to load in terms of deformation based failure, fracture and fatigue.

Manufacturing Processes and Industrial Automation
10 credits

This module will deliver a broad introduction to industrial automation, and cover policy and logistical considerations that drive process solutions. You will work on automation and assembly problems and cultivate a deep understanding of electronic, electrical and pneumatic control.

Dynamics and Control
10 credits

Within this module, you will develop knowledge and experience of analytic and simulative methods applied to modelling of open and closed loop engineering systems with multi-physics dynamics.

Teaching and work-related learning

Excellent facilities and learning resources

We adopt an active blended learning approach, meaning you will experience a combination of face-to-face and online learning during your time at LJMU. This enables you to experience a rich and diverse learning experience and engage fully with your studies. Our approach ensures that you can easily access support from your personal tutor, either by meeting them on-campus or via a video call to suit your needs.

Teaching is via a combination of lectures supported by small, group tutorials, online activities, seminars and practical sessions. Initially formal teaching accounts for approximately 23 hours of your week, but decreases to around 14 hours as the course progresses and independent study time increases from approximately 27 to 36 hours per week. 

Work-related Learning

This course offers an invaluable opportunity to undertake an industrial placement after Level 5. This experience cannot be underestimated as it will give you a chance to put into practice what you have learnt at LJMU, enhance your skills and provide a taste of what it's really like to work in industry. It will also give you a head start when you come to negotiate your way around the competitive job market.

Support and guidance

Dedicated personal tutor, plus study skills support

You will be allocated a personal tutor to discuss course-related issues, work on a personal development plan and set your own targets.

Should you decide to undertake a year’s placement, a placement tutor will liaise between you and potential employers and help you to find a suitable post. Once you are settled in your placement, you will have regular support from an academic staff member who will visit you in your workplace to check on progress.

Assessment

Assessment varies depending on the modules you choose, but will usually include a combination of exams and coursework.

Assessment is usually via a combination of exams and coursework, and sometimes by a portfolio of work, depending on the subject. A final year project gives you the chance to work independently and contributes considerably to your final mark.

Your tutors will give prompt and constructive feedback via Canvas (our virtual learning environment), face-to-face or as written comments. This will help you to identify your strengths as well as the areas where you may need to put in more work.

Replace with quote from the featured tutor

Facilities

What you can expect from your School

This programme is delivered in the Byrom Street complex of LJMU’s City Campus. Here you’ll find high quality lecture theatres, meeting and seminar rooms plus social spaces and a large café. The Avril Robarts Library, open 24/7 during semester, is just minutes away on Tithebarn Street.

Entry requirements

Please choose your qualifications below to view requirements

Minimum points required from qualifications: 88


GCSE and equivalents

Prior to starting the programme applicants must have obtained Grade C or Grade 4 or above in English Language and Mathematics GCSE or an approved alternative qualification below:

  • Key Skills Level 2 in English/Maths
  • NVQ Level 2 Functional skills in Maths and English Writing and or Reading
  • Skills for Life Level 2 in Numeracy/English
  • Higher Diploma in Maths/English
  • Functional Skills Level 2 in Maths/English
  • Northern Ireland Essential Skills Level 2 in Communication or Application of Number
  • Wales Essential Skills Level 2 in Communication or Application of Number

A Levels

  • Minimum number of A Levels required: 1
  • Is general studies acceptable? Yes
  • Average A Level offer: CCD
  • Are AS level awards acceptable? Acceptable only when combined with other qualifications
  • Maximum AS Level points accepted: 20

T Levels

88 UCAS tariff points from relevant subjects. Please contact the Faculty for further information.

BTEC qualifications

  • National Certificate (RQF): Acceptable only when combined with other qualifications
  • National Extended Certificate: Acceptable only when combined with other qualifications
  • National Diploma (RQF): Acceptable on its own and combined with other qualifications
  • National Diploma subjects / grades required: DD if studied on its own or to the total of 88 UCAS points when combined with other qualifications
  • National Extended Diploma (RQF): Acceptable on its own and combined with other qualifications
  • National Extended Diploma subjects / grades required: MMM if studied on its own or To the total of 88 UCAS points when combined with other qualifications.

Access to Higher Education Diploma

  • Access to Higher Education Diploma acceptability: Acceptable on its own and combined with other qualifications
  • Further information: 88 tariff points from Access to HE Diploma.

International Baccalaureate

  • International Baccalaureate: Acceptable on its own and combined with other qualifications
  • Additional information: 88 UCAS tariff points from IB

Welsh awards

  • Welsh Baccalaureate: Acceptable only when combined with other qualifications

Irish awards

  • Irish Leaving Certificate: Acceptable on its own and combined with other qualifications
  • Grades / subjects required: 88 UCAS points from a minimum of 5 subjects
Will I be interviewed?

No interview required (UCAS application form only)

IELTS

6.0 (minimum of 5.5 in each component) or equivalent English language proficiency test.

International entry requirements

Find your country

Please Note: All international qualifications are subject to a qualification equivalency check.

Can this course be deferred?

Yes

Is a DBS check required?

No

The University reserves the right to withdraw or make alterations to a course and facilities if necessary; this may be because such changes are deemed to be beneficial to students, are minor in nature and unlikely to impact negatively upon students or become necessary due to circumstances beyond the control of the University. Where this does happen, the University operates a policy of consultation, advice and support to all enrolled students affected by the proposed change to their course or module.

Further information on the terms and conditions of any offer made, our admissions policy and the complaints and appeals process.